answersLogoWhite

0

Very slowly with a Carbide drill bit or Diamond core bit, both will work, but the diamond core bit works much better, make sure the bit has a constant flow of coolant or be submerged in the coolant. (go very slowly, do not apply much pressure, let the bit do the cutting) The best way is to use a drill press but a hand drill will work.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Can you cut a hole behind the license plate for access to the trunk of a 1995 Jaguar XJ6?

Yes my husband had to drill a hole in his trunk behind the license plate and got in the trunk


What types of drill bit to be used for hole of 12mm dia in 12mm SS plate?

A standard HSS drill bit in 12mm is all that's needed.


Can you drill a hole in the sides of a brinks safe?

You can drill a hole in the side of anything with the right drill.


You want to cut a hole of 245mm diameter in steel plate of 20mm thickness on radial drill machine what should you do?

You can develop a hole saw cutter for the purpose, with a pilot.


How can I drill a bigger hole in an existing hole?

To drill a bigger hole in an existing hole, you can use a larger drill bit than the one used to create the original hole. Place the larger drill bit in the existing hole and drill through it to make the hole bigger. Make sure to use the appropriate safety precautions and techniques while drilling.


A can be used to cut a round hole in wood?

you can cut a hole in wood using a special drill attachment. alternatively you could drill a hole then cut a hole with a jigsaw


How can I effectively drill a hole in wood?

To effectively drill a hole in wood, you will need a drill with the appropriate drill bit for wood. Mark the spot where you want to drill the hole, then secure the wood in place. Start the drill at a slow speed and gradually increase it as you drill. Apply steady pressure and keep the drill perpendicular to the wood to ensure a clean and precise hole.


How can I drill a pocket hole without using a jig?

To drill a pocket hole without using a jig, you can use a regular drill and a pocket hole drill bit. First, set the drill bit to the correct depth for the thickness of your wood. Then, angle the drill bit at 15 degrees and drill into the wood at the desired location for the pocket hole. Be sure to hold the drill steady and straight to create a clean and accurate pocket hole.


How can I drill a hole without a drill?

You can drill a hole without a drill by using a hammer and nail to create a starting point, then using a screwdriver or chisel to slowly widen the hole until it reaches the desired size.


What size drill for 12 metal screw?

If you want it to grip, drill a 9/64 hole. For a clearance hole, drill 7/32.


How to drill a pilot hole effectively?

To drill a pilot hole effectively, start by selecting the right size drill bit for the screw you will be using. Mark the spot where you want to drill the hole and then slowly drill into the material using light pressure. Make sure to keep the drill straight and steady to prevent the bit from wandering. Once the pilot hole is drilled, you can then drive the screw into the hole with ease.


If you are drilling a hole in a wall with an electric hand drill then what action will make the hole be drilled?

The rotating action of the drill bit makes the hole.