0
Hi, The first part to ask you is yours a 4wd or 2wd? If it is just a 2wd, then all you have to do is remove all your bolt then nudge it loose, don't pry it with a tool as it can be damaged. By the way, I'll take it for granted that you know to drain all your oil firsr? Make sure you have your new gasaket and gasket goop and clean all the surfaces well before you reassemble. All of the info is the same for a 4wd, if your '03 is anything like my '97, you need to disengage the front drive shaft at the universal and when you remove or drop it out of the way, then you'l be able to remove the oil pan. My gasket had to be replaced last year and that's what I had to do. You might want to check the condition of the universal while you have it off and see if it also needs to be replaced, Gofd luck with it. Steve H.
What else can I help you with?
How do you change the oil pan on a 2003 Chevy Malibu?
Drain the oil from your 2003 Chevy Malibu oil pan. Remove the oil pan retaining bolts. Remove the oil pan gasket. Put a new gasket on the new oil pan and reverse the process.
How do you change the oil pan on 2003 Chevy cavalier?
what parts do i have to take off, to take off the oil pan on a 2003 chevy cavalier
How do you change transmission oil in 2003 passat?
you need to drop the transmisison oil pan,
Where is oil pan on 2003 Volkswagen Passat?
metal pan is the oil pan on 2003 Volkswagen Passat.
How do you change oil pan gasket on 2003 foud turaus?
put it on the plug
How do you replace front cross member of 2003 Chevy Tracker?
I own 2003 Tracker 4x4 4 cyl. My crossmember is rusted out and the dealer will replaced- no cost to me. But I have question: if the crossmember is out - will be easy to replace the oil pan and starter ? any saving for me? Mark
Where do you change the transmission fluid in a 2003 Jeep liberty?
Remove transmission oil pan
How do you change an oil pan gasket on a 2003 Pontiac aztek?
To change the oil pan gasket on a 2003 Pontiac Aztek, first, ensure the engine is cool and disconnect the battery. Drain the engine oil and remove any components obstructing access to the oil pan, such as the exhaust or crossmember. Remove the oil pan bolts and carefully detach the oil pan from the engine, clean the mating surface, and replace the old gasket with a new one. Reinstall the oil pan, torque the bolts to the specified settings, and refill the engine with oil before reconnecting the battery.
How do you change oil pump on 2003 escalade?
To change the oil pump on a 2003 Cadillac Escalade, first, ensure the engine is cool and disconnect the battery. Drain the engine oil and remove the oil pan by unbolting it from the engine block. Once the pan is off, unbolt the old oil pump and detach it from the engine; replace it with a new oil pump, ensuring proper alignment. Reinstall the oil pan, refill with oil, and reconnect the battery.
How do you change a 2003 Honda rebel 250 oil filter?
there is no oil filter! just a magnet to catch fillings in pan. what is the capacity of oil
How do you change the transmission fluid and filter on a 2003 Chevy silverado if doing it yourself?
Remove transmission oil pan to access filter. Clean oil pan , replace oil, filter, and gasket
Where is drain plug for transmission fluid on a 2003 Kia Rio car manual located?
If its not on the transmission pan ,you have to remove the pan to change the oil
