your manual should show you as I am not sure on stock adjustment. the rear carburetor has an adjustment screw on top just back from where it goes into the cylinder. it is recessed in a screw hole on the right side of bike from riding view. the front carb has one on the left side and is just in front of throttle cam. refer to parts finder online for your local shop. they sometimes have online parts finders. enter the info they request and go to carburetor section. it should have a blow up view and parts id #'s you can refer to. a manual would be handy and your local shop should be able to guide you to the adjustments out if in stock form. if pipes installed and filter jets are necessary for that if you are not experienced with these types of carburetors contact your local shop. hope this helps you as air mixture can be a bandaid for a problem with carburetor issues.
If you need to ask this question your better off having a professional work on it for you.
2000 intruder1400=70hp
VERY likely your fuel mix is too lean. Adjust the air/fuel mix settings and it should fix it.
The fuel pressure for a 94 Suzuki Intruder 1400 is between 40 and 48 psi. A fuel pressure gauge is needed to test the pressure.
One at a time.
the 1400 intruder didnt come out till 1987. nevertheless its at the back of the engine right near the battery box.
Suzuki VS 1400 Intruder, 1987 has an OHC fuel control. It weighs around 573 pounds and has Fuel capacity of 13. 00 liters or 3. 43 gallons.
with a 10 mm wrench
3.7 quarts 3.7 quarts
200 - 220 cl.
how do you remove backrest on a 1994 suzuki intruder 1400
I was a Suzuki salesman for 3 years. Suzuki claims 72 horsepower. They are brutal fast for what they are and for what you pay for them.