0
What else can I help you with?
Where is the FM antenna?
You need to be more specific. Where is the FM antenna on what? The FM antenna at a radio staion could be on a mountain. FM is called line of site transmission. Meaning, it shoots a beam , or wave, in a staight line to your antenna on your car or house. So, FM can be heard even if you are going through a tunnel, provided there are no mountains to block the signal. It is also called Frequency Modulation. AM is Amplitude Modulation. It is bounced up and down between the atmospere and the ground, until it hits your antenna. So, AM can even be heard if mountains block your signal. It simply bounces over and on top of them to your antenna. Where is your car?
Why you convert FM signal to IF frequency?
Mix it with a local oscillator whose frequency is (the IF frequency) away from the frequency of the FM signal you're interested in.
Differentiate FM signal from AM signal?
FM = Frequency Modulation; AM = Amplitude Modulation; each being a technique by which the speech signal is imprinted onto the carrier signal (the one to which you tune the radio). FM is a higher frequency than AM. FM also only uses the 2.7hz upper side band of the frequency while AM utilizes the entire 6hz both the LSB, USB and the .6hz carrier wave. That allows AM to travel farther than a FM signal.
How is FM transmitted?
the digital signal is converted to analog signal after using by transmitted antenna
Why are FM tones used in ASSR?
boz there is lesas interferance to the signal as a signal travels...............
Why is amplitude of demodulated FM signal much less than modulated signal?
because demodulated FM is an audio signal, which the frequency is much smaller that is why it can be transmitted alone. It need carrier which has large frequency. Modulated signal is an audio signal + carrier that is why the amplitude is higher.
Why FM is good than am in communication?
The FM signal is more amune to static in the atmosphere than AM signals.
What determines the amount of deviation of an fm signal?
FM or frequency modulation is a means to vary the frequency withing a set basic frequency and transmit it. FM radio demodulate the frequency extracting the signal that made the frequency shift at the source.
What is the need for limiter in FM receiver?
The limiter clips the top and bottom of the FM signal to remove any AM signal or static that was picked up. This prevents the FM discriminator from seeing those unwanted signals and inadvertently converting them to audio, scrambling the intended audio signal. Simply put, the limiter blocks interference and static making FM reception very clean.
State and prove the sampling theorem?
If the signal is bandwidth to the fm Hz means signal which has no frequency higher than fm can be recovered completely from set of sample taken at the rate
What is the difference between am raido and FM radio?
A: AM radio is an Amplitude Modulation transmission . Meaning it has fix frequency but it is modulated by the signal. FM Frequency Modulation the frequency is modulated by the signal
What is the difference between FM transmitters?
Fro transmitting FM signals from one point to another,one need to have a full system that transforms your signal. The FM transmitter and FM modulator are two parts of this system and they are both necessary in making the system function as desired. The transmitter is the part that dissipates the FM signal into the air so that it can be received by antennas somewhere else. The FM modulator, on the other hand, is responsible for piggybacking the signal onto the carrier signal. Refer american-writers.org for more information.
