0
when you need to find mass or weight of 80mm thick mild steel plate then just measure it's length and width and multiply by it's mass or weight per sqm.
volume of steel = 2.5x1.25x.08 = 0.25 cub.m
assuming your steel to be mild steel (if the steel is different then place appropriate density for it and you need to workout as below)
density of mild steel= 7850 kg/m3
mass of steel = 0.25x7850 = 1962.50 Kg
weight of steel = 1962.50x9.81 = 19252.13 N
A little time saver for next time:
Area of steel = 2.5x1.25 = 3.125 sqm
so mass per sqm = 1962.50/3.125 = 628 Kg
weight per sqm = 19252.13/3.125 = 6160.68 N
What else can I help you with?
How do calculate the price of ms plate 28mm?
To calculate the price of a 28mm MS (mild steel) plate, you need to determine the weight of the plate based on its dimensions and the density of mild steel (approximately 7.85 g/cm³). First, calculate the volume by multiplying the length, width, and thickness (28mm converted to meters). Then, multiply the volume by the density to find the weight in kilograms. Finally, multiply the weight by the market price per kilogram of mild steel to get the total price.
What is the weight of 8 mm ms plate?
The weight of an 8 mm mild steel plate would depend on the dimensions of the plate. However, as a rough estimate, the weight of a 8 mm thick mild steel plate measuring 1 square meter would be approximately 62.8 kg.
What is the weight of 40x40x5 mm mild steel angle per meter length?
3 KG / Meter
What is the weight per meter of 140x140x12.5 shs mild steel?
To calculate the weight per meter of a 140x140x12.5 SHS (Square Hollow Section) mild steel, you would need to first calculate the cross-sectional area (A) of the SHS using the dimensions provided. Then, you can multiply the cross-sectional area by the density of mild steel (7,850 kg/m^3) to get the weight per meter.
How much does a plate of 12 4x8 sheet of plate steel weigh?
It depends. How large is the steel plate? How thick is it? This makes things vary. For example: A fat man would weigh more because, he is wider. or thicker A 1/4 thick by 1in wide by 12 in long plate weights 0.85 LB.
What is the weight of 12 mm ms plate?
The weight of a 12 mm mild steel (MS) plate can be calculated using the formula: Weight = Volume × Density. The density of mild steel is approximately 7850 kg/m³. For a 1 square meter (or 1000 mm x 1000 mm) plate, the volume is 0.012 m³, resulting in a weight of about 94 kg per square meter. Therefore, the weight of a 12 mm MS plate depends on its dimensions but is approximately 94 kg for each square meter.
What is the Weight of Mild Steel Angles different sections?
what is the weight od 25x25x3 mm mild steel angle per meter
How much loss is considered during gas cutting work for mild steel plate?
Gas cutting & burning loss calculation chart required for mild steel plate?
What is weight of 100x25mm ms box?
To calculate the weight of a 100x25 mm mild steel (MS) box section, you need the volume and the density of mild steel. The density of mild steel is approximately 7850 kg/m³. The weight can be calculated using the formula: weight = volume × density. For precise weight, the wall thickness of the box section is also needed; however, a rough estimate for a standard hollow section can be obtained by calculating the volume of the material used.
How do you calculate rolling margin of steel?
To calculate the rolling margin of steel, first determine the theoretical weight of the steel based on its dimensions and density (typically around 7850 kg/m³ for mild steel). Next, measure the actual weight of the rolled steel product. The rolling margin is then calculated as the difference between the actual weight and the theoretical weight, expressed as a percentage of the theoretical weight. The formula is: ((\text{Actual Weight} - \text{Theoretical Weight}) / \text{Theoretical Weight} \times 100%).
What is tensile strength of marine quality mild steel plate?
according to ASTM A36 Marine grade mild steel plate has a tensile strength of 58 - 80 thousand psi.
How do you calculate weight of mild steel when sectional area given?
Calculate the volume first by multiplying the cross sectional area with length.Multiply the volume with density of mild steel which will give the weight.The density of Mild steel is 7850 kg/ m3e.gCalculate the weight of 2 m rod having cross sectional area of 5 m2Volume = 2x5 = 10 m3Weight = 10 x 7850 = 78500 kgBe specific that same units are used all around the calculations.
