answersLogoWhite

0

48.7 kgs / M

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Physics

What is the weight per square meter of 2mm thick HRCA mild steel sheet?

The weight of mild steel can vary slightly depending on the exact composition, but as a general rule of thumb, the weight of a 2mm thick hot rolled commercial quality mild steel sheet is approximately 15.7 kilograms per square meter.


What is the weight of 8 mm ms plate?

The weight of an 8 mm mild steel plate would depend on the dimensions of the plate. However, as a rough estimate, the weight of a 8 mm thick mild steel plate measuring 1 square meter would be approximately 62.8 kg.


40x5mm thick MS flat weight per meter?

The weight of a 40x5mm thick MS (mild steel) flat bar per meter can be calculated by multiplying the volume (area x length) by the density of mild steel. The area of the flat bar is 40mm x 5mm = 200mm². The volume per meter would be 200mm² x 1000mm = 200,000 mm³. The density of mild steel is around 7850 kg/m³, so the weight per meter would be 200,000 mm³ x 7850 kg/m³ = 1.57 kg/m.


What is the weight per meter of 40 mm dia ms pipe hallow pipe?

The weight of a hollow MS (mild steel) pipe depends on the thickness of the pipe wall. The weight can be calculated by using the formula: Weight = 0.02466 * Thickness * (Outer Diameter - Thickness) for a round hollow pipe.


What is the weight per meter length of 12mm dia ms rod?

The weight of a 12mm diameter mild steel (MS) rod per meter length can be calculated using the formula: Weight = (Diameter^2) x 0.00617 where Diameter is in mm. Therefore, for a 12mm diameter MS rod, the weight per meter length would be approximately 0.888 kg.

Related Questions

What is the Weight of Mild Steel Angles different sections?

what is the weight od 25x25x3 mm mild steel angle per meter


What is the weight per square meter of 2mm thick HRCA mild steel sheet?

The weight of mild steel can vary slightly depending on the exact composition, but as a general rule of thumb, the weight of a 2mm thick hot rolled commercial quality mild steel sheet is approximately 15.7 kilograms per square meter.


What is the weight of 40x40x5 mm mild steel angle per meter length?

3 KG / Meter


What is the weight of 50x50x5 mm mild steel angle per meter length?

What is the weight of 50x50x5 mm mild steel angle per metre length? Density mild steel is 7.85 g/cm3 Volume is 2x(4.5x0.5x100)+(0.5x0.5x100)=475 cm3 Weight is 7.85x475=3728.75 g (per metre).


What is unit weight of mild steel bars?

[diameter]^2 / 162 kg 1.580 kg / meter


What is wt per meter of 30x3 thick ms flat?

To calculate the weight per meter of a 30x3 mm mild steel (MS) flat bar, you can use the formula: weight (kg/m) = (width x thickness x density) / 1000. The density of mild steel is approximately 7850 kg/m³. For a 30x3 mm flat bar, the weight per meter would be approximately 0.706 kg/m.


What is the weight of 8 mm ms plate?

The weight of an 8 mm mild steel plate would depend on the dimensions of the plate. However, as a rough estimate, the weight of a 8 mm thick mild steel plate measuring 1 square meter would be approximately 62.8 kg.


40x5mm thick MS flat weight per meter?

The weight of a 40x5mm thick MS (mild steel) flat bar per meter can be calculated by multiplying the volume (area x length) by the density of mild steel. The area of the flat bar is 40mm x 5mm = 200mm². The volume per meter would be 200mm² x 1000mm = 200,000 mm³. The density of mild steel is around 7850 kg/m³, so the weight per meter would be 200,000 mm³ x 7850 kg/m³ = 1.57 kg/m.


What is the weight of 12 mm ms plate?

The weight of a 12 mm mild steel (MS) plate can be calculated using the formula: Weight = Volume × Density. The density of mild steel is approximately 7850 kg/m³. For a 1 square meter (or 1000 mm x 1000 mm) plate, the volume is 0.012 m³, resulting in a weight of about 94 kg per square meter. Therefore, the weight of a 12 mm MS plate depends on its dimensions but is approximately 94 kg for each square meter.


What is the weight of 50x50x6 ms channel?

The weight of a 50x50x6 mild steel (MS) channel can be calculated using the formula for the weight of steel, which is approximately 7850 kg/m³. A 50x50x6 channel typically has a weight of about 6.64 kg/m. Therefore, if you have a length of 1 meter, the weight would be approximately 6.64 kg. For longer lengths, simply multiply the weight per meter by the total length in meters.


What is the weight of 40x40x3 mm mild steel angle per meter length?

Weight of 60x60x6mm Angle is 5.4 kg/m. So, 4 metre length, it will be 21.6 kg Total.


Formula to calculate weight of MS pipes per meter length?

The formula to calculate the weight of MS (Mild Steel) pipes per meter length is as follows: Weight per meter = (outer diameter - thickness) * thickness * 0.0246615 * 2.76, where the outer diameter and thickness are in millimeters. This formula takes into account the density of mild steel (7.85 g/cm³) and the conversion factor to get the weight in kilograms per meter. It is important to ensure that the units are consistent throughout the calculation to obtain an accurate result.