[diameter]^2 / 162 kg
1.580 kg / meter
22mm diameter deformed bars unit weight kilogram per meter
Rolling Margin is the deviation of actual unit weight to that of Standard unit weight as per IS Standards. Rolling Margin is calculated as : Sectional weight = Weight of Steel Bars dia wise / length of the bars. As per IS Standards unit weight of the Bars is calculated as dia x dia / 162 Rolling Margin is deviation of actual sectional weight to that of IS Standard unit weight. Standard Rolling Margin for different dia reinforcement bars used for construction purposes: 8mm to 10mm +- 7% 12mm to 16mm +- 5% 20mm & Above +- 3%
weight of all steel can be calculated by multiplying unit volume with density.
16mm dia weight for running feet
Ans: The unit weight of RCC IS 2500 KG/ CUM Ans: The unit weight of RCC IS 2500 KG/ CUM Ans: The unit weight of RCC IS 2500 KG/ CUM
22mm diameter deformed bars unit weight kilogram per meter
Rolling Margin is the deviation of actual unit weight to that of Standard unit weight as per IS Standards. Rolling Margin is calculated as : Sectional weight = Weight of Steel Bars dia wise / length of the bars. As per IS Standards unit weight of the Bars is calculated as dia x dia / 162 Rolling Margin is deviation of actual sectional weight to that of IS Standard unit weight. Standard Rolling Margin for different dia reinforcement bars used for construction purposes: 8mm to 10mm +- 7% 12mm to 16mm +- 5% 20mm & Above +- 3%
The unit weight of a 75x38 mm mild steel rectangular box pipe section can be calculated using the formula: Unit Weight = (Weight of steel per cubic meter) × (Volume of the section). The density of mild steel is approximately 7850 kg/m³. For a 75x38 mm section, you'd first calculate the volume based on the dimensions and wall thickness, then multiply by the density to find the unit weight. For precise calculations, the wall thickness is needed.
No set answer to that, as steel pipes come in various diameters and wall thicknesses. If you want to be real accurate, they also come in various steel alloys, which do have some difference in density between them.
unit wt of reinforcement bar can be obtained in kg/ meter by d*d/162.162 where d is the dia of bar The formula is based on the density of rebar 490 lb/cft
If it section is a rolled like beam,channel,square,angles&flat. weight=Length x unit weight unit weight of this section is=123kg/m^3 If it is plate or sheet weight=Length x width x thickness x 7.85(sp.gravity of steel)
kilo/ tonnes
375 pounds
weight of all steel can be calculated by multiplying unit volume with density.
V= 529+tgy-ur/gay. = steel
7.9kg/sq.M
20 MM