answersLogoWhite

0

16mm dia weight for running feet

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What is the unit weight of 16mm?

The unit weight of a 16mm steel bar is approximately 1.58 kg/m.


What the unit weight of the rebars 16mm?

The unit weight of 16 mm reinforcement is 1.58 kg/m


How do you calculate unit weight of steel?

weight of all steel can be calculated by multiplying unit volume with density.


How to calculate unit weight of the structural steel?

If it section is a rolled like beam,channel,square,angles&flat. weight=Length x unit weight unit weight of this section is=123kg/m^3 If it is plate or sheet weight=Length x width x thickness x 7.85(sp.gravity of steel)


What is the unit weight of c channel 125?

The unit weight of a C channel 125 depends on its dimensions and material. To calculate the unit weight, you would need to know the dimensions (width, height, and thickness) of the C channel and the material (e.g., steel, aluminum) it is made of. Once you have this information, you can use a standard formula to calculate the unit weight.


What is unit of weight of 38MM of steel?

The weight of steel is typically measured in pounds (lbs) or kilograms (kg) per unit length, area, or volume. To calculate the weight of a specific amount of steel (e.g., 38 mm in length), you would need to know the density of the steel and apply the appropriate conversion factors.


How calculate the unit weight of aluminum section?

What is the unit weight of aluminium section and how its calculate


Per meter unit weight of mild steel hollow pipes 2 mm thick?

No set answer to that, as steel pipes come in various diameters and wall thicknesses. If you want to be real accurate, they also come in various steel alloys, which do have some difference in density between them.


How can you calculate kg steel in m3 of concrete raft foundation of building of 2 story o are of 2000 m2 using steel rebar of 25 mm of lenght 12 m rods?

Calculate the length of steel you are going to use the building and muliply the length with unit weight of the steel.ex: 12 m 25mm steel weight is12 x 3.85 =46.2 kg3.85 kg/m is the unit weight of 25mm bar


Rolling margin of steel rod which is used for construction?

Rolling Margin is the deviation of actual unit weight to that of Standard unit weight as per IS Standards. Rolling Margin is calculated as : Sectional weight = Weight of Steel Bars dia wise / length of the bars. As per IS Standards unit weight of the Bars is calculated as dia x dia / 162 Rolling Margin is deviation of actual sectional weight to that of IS Standard unit weight. Standard Rolling Margin for different dia reinforcement bars used for construction purposes: 8mm to 10mm +- 7% 12mm to 16mm +- 5% 20mm & Above +- 3%


What is the unit weight of 75x38MM ms rectangle box pipe section?

The unit weight of a 75x38 mm mild steel rectangular box pipe section can be calculated using the formula: Unit Weight = (Weight of steel per cubic meter) × (Volume of the section). The density of mild steel is approximately 7850 kg/m³. For a 75x38 mm section, you'd first calculate the volume based on the dimensions and wall thickness, then multiply by the density to find the unit weight. For precise calculations, the wall thickness is needed.


What you the unit weight of steel?

kilo/ tonnes