0
I am in need of advice on how to remove the rear inside panels to access the bolts for the shocks on a 2004 Mazda Tribute, I do not want to break any of the plastic studs in the process, need the locations of the attachment points
What else can I help you with?
How do you change alternator on Mazda tribute 2003 4-cylinder?
how to change alternator in a 2003 mazda tribute 2.0L
Does a Mazda tribute have shocks or struts?
both
How do you change a heater core on a 2003 Mazda tribute?
The heater on the 03 Mazda Tribute is going in and out. What is the problem and how can it be fix?
How do you replace rear shocks 2003 altima?
How do you replace rear shocks on a 2003 altima?
How do you change rear shocks in a 2006 Mazda tribute?
To change the rear shocks on a 2006 Mazda Tribute, start by safely lifting the rear of the vehicle and supporting it with jack stands. Remove the rear wheels for better access. Then, unbolt the bottom and top mounting bolts of the shock absorbers using the appropriate socket and wrench. Replace the old shocks with new ones, ensuring they are securely fastened, and reassemble everything in reverse order before lowering the vehicle back to the ground.
How do you change the struts on 2003 grand marquis?
The Grand Marquis has shocks, not struts. They are simple bolt on parts.
How much oil is needed for 2003 Mazda Tribute oil change?
I just did it. 5 qts.
Does a 2003 altima have shocks or struts?
front has struts and the rear haas shocks
How do you change rear shocks on Kia Rio 2003?
To change the rear shocks on a 2003 Kia Rio, start by safely lifting the rear of the vehicle and securing it on jack stands. Remove the rear wheels to access the shocks, then unbolt the lower shock mount and the upper mounting bolts using the appropriate socket and wrench. Replace the old shocks with new ones, ensuring they are properly aligned, and then reattach the bolts securely. Finally, replace the wheels and lower the vehicle back to the ground.
When was Tribute to Lester created?
Tribute to Lester was created on 2003-08-26.
How do you change shocks on 2003 Mazda tribute?
The Mazda tribute has rear shocks only the front are struts. So to replace the rear shocks you must remove the interior trim panels in the rear to gain access to the top retaining nut on the shocks. Remove the top nut using two wrenches. One to hold the stem of the shock using the "flats" and the other to turn the retaining nut. Use penatrating oil to help remove the nut if it is rusty. Remove the lower bolts on the bottom of the shock using an 18 mm wrench. Heat and penatrating oil will help if the nut and bolt are rusty. Remove the shock and install the new shock. Do not cut the plastic retainer on the new shock until it is installed. A good chiltons manual will give you directions on how to remove the trim pieces.
How do you change back shocks on a 1995 cheve caprice?
A person can change the back shocks on a 1995 Chevy Caprice by unmounting them from the upper lower mounts. The shocks can then be removed from the vehicle and new shocks put in their place.
