0
This question is too general but will provide an answer to the rear light on 2007 CTS (which I presume is the same for all current models). The nuts needed to be unscrewed are accessed behind the body panels in the trunk. The body panel can be pulled away by unscrewing the tie downs (black plastic knobs) and moving the cover from the spare wheel well. Note: be careful unscrewing the nuts so they aren't dropped. Although the void in the rear corner is not deep, you will may have to clear some other components bolted to the body in order to get your hands into the void. Once the nuts are removed, the rear light cover can be pulled away from the body. The bulbs can be accessed once the cover is pulled away from car body.
This question is too general but will provide an answer to the rear light on 2007 CTS (which I presume is the same for all current models). The nuts needed to be unscrewed are accessed behind the body panels in the trunk. The body panel can be pulled away by unscrewing the tie downs (black plastic knobs) and moving the cover from the spare wheel well. Note: be careful unscrewing the nuts so they aren't dropped. Although the void in the rear corner is not deep, you will may have to clear some other components bolted to the body in order to get your hands into the void. Once the nuts are removed, the rear light cover can be pulled away from the body. The bulbs can be accessed once the cover is pulled away from car body.
What else can I help you with?
How do you change a Chevy Colorado brake light switch?
The Chevrolet Colorado brake light switch is quite simple to change. The brake light switch simply plugs in and out.
How do you change a brake light switch on a 2001 Daewoo Leganza?
Were and how do you change a brake light switch on a Daewoo Leganza 2001
How do you change the brake light switch in a 2007 Chevy Colorado it has two switches?
how to change brake light switch in a 2007 chevy colorado
How do you change the brake light switch on a 1998 Chevy S-10 V6?
It is quite simple to change the brake light switch on your 1998 Chevy S 10 pickup truck. The brake light switch simply plugs in and out.
How do you change brake light switch on 1999 Chevy cavalier?
Changing the brake light relay switch on your 1999 Chevy Cavalier is quite easy. The brake light switch simply plugs in and out.
Brake light stays on How can you FIX THIS 1991 Acura Legend?
You will need to change the brake light switch. The brake light switch can be found below the dashboard on the drivers side.
Where is brake light switch?
where is brake light switch
How do you change a peugeot 307 brake light switch?
In order to change the brake light switch in a Peugeot 307, you must dismantle and access the main light board on the dash and find the connecting switch, thusly flipping it back to the on position.
How do you change brake light switch on 93 Jeep Grand Cherokee?
The 1993 Jeep grand Cherokee brake light switch simply plugs in and out. The brake light switch is located beneath the dashboard on the drivers side of the engine compartment.
How do you change the brake light switch on a 1994 silverado?
Take hold of the brake light switch and pull backwards. The switch will come out in the same way that you would unplug anything. Plug the new switch in
How do you change brake light switch on a Skoda fabia?
To change the brake light switch on a Skoda Fabia, first, disconnect the vehicle's battery to ensure safety. Locate the brake light switch, which is typically situated above the brake pedal. Remove the electrical connector from the switch and unbolt or unscrew the switch from its mounting. Install the new switch by reversing the process, ensuring it is securely fastened, and reconnect the battery to test the lights.
How do you change the brake light switch on an Audi A3?
To change the brake light switch on an Audi A3, first disconnect the vehicle's battery to ensure safety. Locate the brake light switch, which is typically positioned above the brake pedal. Remove the old switch by disconnecting the wiring harness and unscrewing it from its mount, then install the new switch by reversing the process. Finally, reconnect the battery and test the brake lights to ensure they function correctly.
