The 1993 Jeep Grand Cherokee brake light switch simply plugs in and out. The brake light switch is located beneath the dashboard on the drivers side of the engine compartment.
How to change the brake switch on a 2004 Jeep grand Cherokee Laredo
Yes.
A short in the brake light circuit.
There should be a contact switch just in front of the brake pedal up under the dash panel.
The brake light switch is behind the brake pedal.
Not unless you also change the wheel hub. This might require a complete rebuild of the rear axle.
The emergency or parking brake on 2003 Jeep Grand Cherokee operates a set of brake shoes inside a hub on the rear axles, this is incorporated into the disc brake setup.
You need to check the wiring for power to the bulbs.
either behind or in front of the arm of your brake pedal. Follow the brake pedal up until you find a box, either in front of or behind the brake pedal. You will find that the box has a button on it that is activated by your brake pedal, that is the neutral safety switch.
Defective or mal-adjusted stop light switch? Usually located at the upper end of the brake pedal under dash area
Check the bulbs in case they have fused, next check the fuse, and finally it could be the brake light switch which may need replacing
Problem?