0
go under the car with a 14mm spanner and undo the adjustment nut, also undo the nut that passes thru the clutch lever (sticks out the side of the gearbox) Slide the end of the cable out of the fork, and then remove the 14mm locking nut that holds the sheath of the cable in postition. This completes the 'clutch' size of the cable. Then using a 10mm spanner remove the 2 bolts/nuts in the engine bay where the clutch cable run into the cabin. In the drivers footwell stick your hand up and unhook the hook on the end of the cable off the top of the clutch pedal. Install is reverse of removal but requires you to tighten the clutch cable by tightening the nut on the clutch end of the cable. (you will know when you see it)
What else can I help you with?
Solutions to Firewall cracked where clutch cable mounts suzuki vitara 88?
If the firewall on your 1988 Suzuki Vitara has cracked near the clutch cable mounts, it's important to address this issue promptly to prevent further damage. You can repair the crack by cleaning the area around it and using a strong epoxy or metal patch for reinforcement. Additionally, consider using a grommet or rubber seal around the clutch cable to reduce stress on the firewall. If the damage is extensive, consulting a professional mechanic for a more thorough repair may be necessary.
How do you adjust clutch cable on 1300 suzuki?
the hayabusa does not have a clutch cable. the clutch is hydraulic just like the b
Where is the clutch fluid reservoir on a Suzuki Samurai?
they have a cable clutch not hydraulic
Where does the clutch fluid go in 95 suzuki sidekick?
Suzuki Sidekick has a cable for the clutch. No fluid required. If it hard to push or seems to 'stick' then replace the cable.
How do you change clutch cable on 2009 Chevrolet Cobalt?
how do you change clutch cable on cobalt
How do you change the clutch cable on 1994 GMC sierra?
There is no clutch cable its hydrolic.
How do you install clutch cable on a 95 Suzuki sidekick jx 16 valve?
To install the clutch cable on a 1995 Suzuki Sidekick JX 16 valve, start by disconnecting the old cable from the clutch pedal and the transmission. Route the new cable through the firewall and secure it to the clutch pedal assembly. Next, attach the cable to the clutch release lever on the transmission, ensuring it is properly adjusted for tension. Finally, check the clutch operation to ensure it engages and disengages smoothly.
How do you change a clutch cable on a 1998 integra?
You don't. There is not a clutch cable on a 1998 integra. It has a hydraulic clutch.
How do you change the clutch cable on an 1985 mr2 na?
You have a hydraulic clutch in your mr2, no cable.
How do you change a clutch cable for a Renault Megane R reg?
clutch cable replace
How do you change a clutch cable on a Daewoo nexia?
Daewoo nexia is with hidrolic sistem for clutch. There is no cable
How do you adjust a cluch cable on a rover 200?
you can adjust the clutch cable as it is a hydraulic clutch, only option is to change the clutch if it is worn or slipping.
