answersLogoWhite

0

There are 2 pipe plugs in the back side of the transfer case....one in the upper portion and one in the bottom. First remove the bottom plug to drain old oil. Remove top plug too assist drainage of oil. After old oil is drained reinstall bottom plug. New oil must be installed through top plug opening. It should hold slightly more than 1 qt. of oil. Fill until oil starts to come out of the top opening. Install plug into top opening.

The first step should actually be - remove the top/fill plug because if you remove the drain plug first and then cannot remove the fill plug... you are stuck with an empty T-case and no way to fill it. You might need to drive to get a tool or go to the shop to get the plug loosened for you.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How to change chain in transfer case in 1992 tracker?

To change the chain in the transfer case of a 1992 Suzuki Tracker, first, safely lift and secure the vehicle. Drain the transfer case fluid and remove the transfer case from the vehicle by disconnecting it from the transmission and any associated mounts. Open the transfer case, remove the old chain, and replace it with a new one, ensuring proper alignment. Finally, reassemble the transfer case, reinstall it in the vehicle, and refill with the appropriate fluid.


Can a tracker with an automatic transmission be towed?

yes just place the transfer case into neutral


How do you replace Transfer case control Module for a 1994 k2500 Truck?

A 1994 does not have a control module on the transfer case. But it does have a 4x4 Actuator on the front differential.


Do you use gear oil for 1994 Toyota truck when you change transfer case?

Yes, 90 weight oil is recommended.


How do you tow Geo Tracker 4x4 with automatic hubs?

place transfer case inneutral and go for it


Change a mercury mountaineer transfer case?

How do i change the chain out of my 1998 mercury mountaineer transfer case


How do you change the shift cable on a 1994 GMC sonoma transfer case?

To change the shift cable on a 1994 GMC Sonoma transfer case, first, ensure the vehicle is on a flat surface and the engine is off. Disconnect the negative battery cable for safety, then locate the shift cable attachment on the transfer case. Remove any retaining clips or bolts securing the cable, and then detach the cable from the transfer case and the shifter. Install the new cable by reversing the removal process, ensuring it is properly aligned and secured before reconnecting the battery.


Where is the electric solenoid on the transfer case of a 1994 2500 dodge Cummings?

The only thing electric on the transfer case of a 1994 Ram is the vehicle speed sensor. It is on the tail shaft


Can the 1994 Geo Tracker auto transmission 4 WD be used as a tow vehicle behind motor home?

YES Place tranmission in neutral Place transfer case in neutral Place transmission in park. Have Fun !


What if you poured a little brake fluid in transfer case?

Change and flush the transfer case fluid immediately.


What type of fluid does a 2004 chev tracker take in its transfer case?

"80-90" weight gear oil. Brand not important.


What fluid goes in a np241 transfer case on a 1994 dodge diesel?

Atf