0
What else can I help you with?
Location of crank sensor on 2.0 Geo Tracker?
The crank sensor on the 2.0 DOHC engine is behind the flywheel (flex plate) on the back of the motor. In order to change it you must pull the transmission or motor.
Where to you fill transmission fluid on a 2003 Chevy Tracker?
It should be the same as a 2002 tracker, behind the manifold, just to the left at the very back of the motor, small dipstick says ATF on it, you will need a funnel designed just for adding transmission fluid, opening very small. Hope this helps.
When pulling the motor in a 95 tracker do you have to remove it with the transmission it is a 4x4?
No you do not, you can leave the transmission were it's at. Just put a jack under the transmission to keep it from falling out.
Would a 1992 geo prism engine fit into a 1996 geo tracker to include the transmission?
No. The Prism motor is a Toyota motor and side mounted. The Tracker motor(suzuki) is mounted with the engine from front to back, so it will not work without a lot(I mean a lot) of work to do it.
What transmission is used with a 1979 350 motor?
it depends on what vehicle it came out of.
Where is the starter on a Jeep Wrangler?
its on the left side behind the motor but before the transmission
Where do you check the transmission fluid on a 2011 Chevy Cruze?
The 2011 Chevy Cruze has a dip stick for checking transmission fluid right behind the motor. When looking at the motor from the front it is located directly behind the manifold cover.
Where is the Lock up torque converter in a 2003 sunfire 2.2 ecotech motor?
It is behind the motor and in front of the transmission.
How and where do you add automatic transmission fluid to a 1997 Geo Tracker?
thru the trany dipstick tube(the tube u pull the transmission dipstick out of) usally its at the back of the motor between the motor and the firewall. but you need to make sure you add the fluid while the motor is running, and the trany is in park.
What does matching numbers mean for a classic car?
It means the vehicle has the original motor and transmission.
Will aTransmission from a1996 Ford Ranger fit a1998 Ford Ranger?
It mostly depends upon the motor that is in your vehicle and the motor in the vehicle in which you are removing the transmission from. It should work as long as they are removed from the same motors. The transmission on a 4cyl will not bolt to a 6cyl. www.FordRanger.net
Where is the flywheel located in a 1994 Ford Ranger?
right behind the motor an in front of the transmission its where they meet
