After removing an EGR valve from the vehicle, the valve can be flushed with carburetor cleaner. If the valve still sticks then a replacement will be needed.
on the crank behind the front cover
it's located on the firewall right in back of the intake
Not very easily if at all, and why would you want to?
3.8 litres is fractionally more than 1 US gallon.
A haynes manual...
They always blow the head gaskets between 70 and 100 thousand miles.
If you mean 3.8 Litre engine, the answer is 200 horsepower, from the factory. 225 lb/ft of torque.
You can safely put 2ml into the 10l aquarium
there should be a sticker under the hood of the car that tells you what the gapping should be. .60
Fuel injected. fuel injected. the 3.8 liter was never carb. it was in the 80's in other GM vehicles
It seems it may have been bad gas. After some gas treatment and an oil change it gradually improved in three or four days and then stopped completly.
Five quarts including filter. My owners manual says 5.75, including filter. My experience agrees with the extra .75 quarts! :)