You have to open up the right wheel well to replace the antenna. It is bolted to the car from the inside of your right hand a pillar. Open the door and you can see the bolt itself. Put a 2x4 between the inner fnder and the car to get enough room to put your arm in to position the new antenna.
The 92 Chevrolet Caprice Classic comes equipped with a 5.0/ 305 c.i.d. engine
23 gallons
225/70-15
To disassemble the power antenna on a 1992 Caprice Classic, first, disconnect the negative battery terminal to ensure safety. Then, remove the inner fender liner or access panel to reach the antenna assembly. Unscrew the mounting bolts or clips securing the antenna and disconnect the electrical connector. Finally, gently pull the antenna out from its housing, taking care not to damage any surrounding components.
How do I replace turn signal on a 1992 Chevrolet caprice classic I want to learn how to do it myself
Yes you can.
You will need to remove the tire and wheel from your 1992 Chevrolet Caprice Classic. Remove the brake shoe spring and caliper. The brake shoes will come off. Reverse the process to install the new brake shoes.
No
It was rated at 210HP.
1992 caprice wagon
The low side port for the AC on a 1992 Caprice Classic is the larger hose coming off the compressor. It is in the rear part of the engine compartment.
yea they will with no problem