sometimes hot water will work or a wallpaper remover steamer.
To remove melted plastic from a wood floor, you will need an iron and brown paper sacks or brown craft paper. Lay the craft paper over the plastic. Apply the hot iron to the paper and apply pressure just until the plastic becomes soft. Once the plastic is soft, peel it off the wood floor.
To effectively clean paint off a wood floor, you can use a scraper or putty knife to gently remove the paint. Then, use a cloth dampened with warm soapy water to wipe away any remaining residue. Be careful not to scratch the wood surface while cleaning.
Use Goof Off.
To effectively remove rug tape from a wood floor, you can use a hairdryer to heat up the tape, making it easier to peel off. Then, use a putty knife or scraper to gently lift and remove the tape residue. Finally, clean the area with a mild solvent or adhesive remover to get rid of any remaining sticky residue.
A little white vinegar is good and won't leave a residue which could be harmful to pets and small children. Finish off with a damp paper towel.
A wife.
To stain a paper bag floor, start by applying wood stain using a sponge or brush, working in small sections. Allow the stain to penetrate the paper for a few minutes before wiping off any excess with a clean rag. Repeat until the desired color is achieved, and then seal the floor with a polyurethane or acrylic sealer for protection.
To effectively remove carpet tape from a wood floor, you can use a hairdryer to heat up the tape, making it easier to peel off. Then, use a putty knife or scraper to gently lift and remove the tape residue. Finally, clean the area with a mild solvent or adhesive remover to get rid of any remaining stickiness.
Lowe's should have fixed their mistake and any damage caused to the floor.
I haven't tried it on wood but lighter fluid seems to get most things off. Acetone too, but it might damage the wood.
Use acetone.
The most effective method for removing glue residue from wood surfaces using a glue remover for wood is to apply the remover to the affected area, let it sit for a few minutes to soften the glue, and then gently scrape off the residue with a plastic scraper or a soft cloth. Repeat the process if necessary until the glue is completely removed.