take off the wheel, take off the caliper, pull
295 ft-lbs
front brake assembly diagram for a 2006 F150 4X4
The min thickness should be stamped on the backside of the rotor, pull and examine.
How to remove the right side axle half on a 1995 f150
1992 ford f150 firing order --------------------------------------------- 1 - 5 - 4 - 2 - 6 - 3 - 7 - 8 The distributor rotor turns COUNTERCLOCKWISE The distributor cap is installed with the # 1 position facing to the rear and slightly towards the drivers side of the engine
where is the pcv valve on a 1992 f150 with 5.0 liter
1 - 5 - 4 - 2 - 6 - 3 - 7 - 8 ( The distributor rotor turns COUNTER CLOCKWISE )
(short wheel base ) 16.5 (long wheel base) 19
to remove the front rotors u must first remove the caliper and caliper frame then remove the nut in the center of rotor rotor should fall off then hope this helps fordtech
I had to drill a hole on the side of the old rotors. make sure the hole is out towards the front edge of the rotor. You want to have a hole that shows the line where the rotor and axle meet. Then I took a hammer and a pointed punch and they came off.
It is clockwise, firing order is 1-5-3-6-2-4
NO