Goof Off or Goo-Gone.
No, the bracket can fall off but the glue needs to be taken off at the dentist by a special piece of equipment
Gorilla glue can be removed from a surface by using acetone or nail polish remover. Apply the acetone to the glue, let it sit for a few minutes, then gently scrape or wipe it off with a cloth or sponge. Repeat as needed until the glue is completely removed.
Without knowing which glue my reply may sound odd. but simply try a sharp craft knife under the edge of the glue and flick it off.
If you mean from the back off tile that has come off a wall or floor - soak the tile for 3-4 hours in hot water, then most glues will wipe off. If you mean glue that has got on front of laid tile, use a sharp craft knife to get under the edge and flick it off.
There is no metal that starts off as glue.
sew it onANS 2 -It depends on the fabric and how long you want the letters to stay on. I have used iron-on tape for this, but it comes off after 4-5 washes.
Depends on the kind of glue - "Name your glue"
Depends what kind of glue.
you have to put more glue on it, it will glue itself to the old glue, and be easier to remove
To remove hot glue from brick, you can try heating the glue with a hairdryer or a heat gun to soften it, and then scraping it off with a putty knife or a similar tool. You can also try applying a small amount of rubbing alcohol or acetone to the glue to help loosen it. Be careful not to damage the brick surface while removing the glue.
Try Goof Off, it softens Super glue so you can pick it off.
It is a version of PVC glue.