on the very top there is a port for the cable but you must have a 5 pin usb you can buy these in psp packs that include covers cables stands and heaps more for around $30 its worth the $30
ok then you have to plug it into the psp and computer then go to my computer click "removable Disk" then if you dont have a folder named MUSIC then make one but remember to rename it MUSIC in CAPITALS ok
for photos u put a folder named PHOTOS in CAPITALS for movies you put a folder called MP_ROOT then inside that folder make a folder called 100MNV01
hope this helped
You can get a cable for your camera which would connect to a computer USB port.
You can connect a guitar to a PC without using an interface by using a 1/4 inch to 3.5mm adapter cable to plug the guitar directly into the computer's microphone or line-in port.
You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.
To connect a MIDI device to your computer using a MIDI to USB B cable, simply plug the MIDI end of the cable into your MIDI device and the USB end into a USB port on your computer. Your computer should automatically recognize the MIDI device and you can start using it with music software or applications.
Device Driver
Yes, you can using USB.
Your question presupposes that you have subscribed to cable internet service, and that the provider has run a cable to your home. It also presupposes that you have a cable modem. If these suppositions are correct, you just have to run coax between the cable jack on the wall and the cable modem. Then you need to connect the modem to your computer via USB, FireWire, or whatever interface your modem and computer have in common. FriPilot
This depends on which printer you have.Some printers have a serial cable and the newer ons have a usb cable. You connect the cable to the computer at the back . Then reboot your computer. You then insert the driver CD into the computer and then install the drivers for that printer.
To connect your Yamaha keyboard to your computer using MIDI, you will need a MIDI-to-USB cable. Connect one end of the cable to the MIDI out port on your keyboard and the other end to a USB port on your computer. Install any necessary drivers, then you can use music software on your computer to communicate with and control your keyboard.
Some modems install internally, others require a cable.
This is a 25 pin cable, usually used to connect a printer to your computer (parallel port). Most printers connect using the USB cable anymore, as other external devices.
Yes - Windows accepts external hardware while it's running without any problems !