answersLogoWhite

0

If you are re-grouting tile, all the old grout must be out, and the area free of dirt and grime. Before you begin you need to make sure of the following. * What is your grout spacing? If it is less than 1/8" you must use non sanded grout. 1/8" or large must use sanded grout. This is something to not be guessed at. Older style 4 1/4" x 4 1/4" usually need non sanded, but today grout spaces on the wall have become larger. If you use the wrong grout, you will be reducing this in short order. * You have no loose tile. Grouting over them will not bond them better to the wall. By leaving them, your grout lines will crack and allow water to make its way back behind the wall. * You have all of your supplies on hand and ready You will need the following supplies * Grout, enough to complete the entire job. * 2 tile sponges * 3 buckets at least 2 1/2 gallons * Good quality grout float - this is a rubber rectangle with a wood handle, used to spread the grout. * Matching silicone caulk * A clean lint free towel or rag * Sealer (not used the day of install!!) When looking for grout, make sure it is latex fortified. Epoxy grouts are great too, but are often hard for a do-it-yourselfer to work with. Grout comes in much larger bags then most people could work within the window it needs to be applied once mixed. Just like a cake recipe you need to measure carefully. Break the bag into four parts along with the mixing instructions. It is best to not "eyeball it" if you want a consistent color. Adding to much or to little water can leave the color off from the other mixed batches. The final mixture it should be about mashed potatoes consistency. Make sure all the thin set is off the face of the tile. Work in a 4'x4' area to start. Using your grout float start at the top of the wall. You want to go diagonal to the grout spacing. This will prevent your float from hitting the joints and marring the lines. Don't allow the grout to sit on the face of the tile longer then 20 minutes before you start wiping. Fill both of the remaining buckets with clean water. Have separate sponges for each bucket. The first water bucket will be for the first few wipes and the second for the remaining final clean up. Using your first sponge start at the top and wipe straight down without stopping. At the bottom of your grouted tile, move your sponge over flip it over and wipe up. Rinse sponge. Continue until your 4 foot area is wiped completely. With the second sponge and repeat the same process. This prevents you from spreading the grout all over the tile and actually takes off more. You want to continue this process until the tile is completely clean. You can at the end use a clean rag careful not to touch the wet grout. The tile is not clean enough if you can still see a film on the tile. This will dry on the face of the tile and leave it looking cloudy and dull. Once all the tile are completely grouted, take your silicone caulk and caulk all the inside corners and where the tile meets the floor, tub, or counter. The grout will need to dry for at least 3 days. Twice a day spray the grout with a water bottle. This helps the grout to dry evenly On the 4th day you can take your sealer. Follow the instructions on your product because sealers are applied differently. Most need to be applied 2 or 3 times. Allow this to dry over night and your job is complete. The best cleaner for ceramic and porcelain tile is vinegar and water. A half and half mixture will clean the toughest stains. Never use it on natural stone.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What do ceramic tile contractors do?

Ceramic tile contractors install ceramic tile floors in any room of a house, and they are specialized and do a great job. They also install other types of tiles, such as ceramic wall tiles, and ceramic countertop tiles.


Can you stick ceramic wall tiles on to ceamic wall tiles?

No, the adhesive won't hold.


How to install ceramic tile properly?

To install ceramic tile properly, start by preparing the surface, applying mortar, placing the tiles, spacing them evenly, and grouting the gaps. Finish by sealing the tiles for protection.


What is the most common wall tile?

The most common wall tile is simply a white ceramic tile. These tiles are extremely cheap and easy to make and install. One can purchase them at a home improvement store.


Bathroom Wall Tiles ?

form_title= Bathroom Wall Tiles form_header= Install or repair bathroom wall tiles in your home! What color tiles do you want to install?*= _ [50] Do you want to repair current tiles?*= _ [50] What is your budget for bathroom tiles?*= _ [50]


Can you install wood flooring over ceramic tiles?

Yes, but it would have to be floating engineered wood.


Should you install ceramic floor or wall tiles first?

Having tiles untold bathrooms I always do the floor LAST this saves dropping tiles etc on to the nice new expensive tile. However, when tiling the walls first leave out the bottom row of wall tile (here you can place your straight edge datum, put in the floor tile then set that last row of wall tile and leave a 1/8" gap between the floor and wall tiles and fill with same water proof grout as the floor tiles have


Can you write with sharpie on ceramic tiles. Will it smudge. Will it look like a fired up tile. What type of ceramic tiles are best to buy for this project. These will be put on the wall.?

If they are glazed, you can write on them, but it will wipe off fairly easily.


What can one use Ceramic art Tiles for?

There are a few uses for Ceramic art Tiles that a person could have. The first is to use them to add accent to a tile floor. The next is to use them as art work for a desk or wall.


What rhymes with dynamic?

ceramic. as in ceramic tiles


You want to install marble on your kitchen floor how much weight will the floor hold?

as much as ceramic or porcelain tiles


How might one apply ceramic wall tiles?

One might apply ceramic wall tiles by using either of 2 products: tile mastic or thinset mortar. The application process is the same for both products. One could use a V-notched trowel to spread some of the mortar onto the wall, covering an area just big enough to lay in about 8 tiles.