Yes, but it would have to be floating engineered wood.
Many things can go over ceramic with ease, but the "best" option is one which works in the room you're doing. For example, laminate flooring is most forgiving of the unevenness (groutlines) of ceramic tile and easiest to install - but I would not put laminate in a bathroom (it's not moisture resistant). For a bathroom, the best option over ceramic is sheet vinyl. Be sure to use leveling compound to smooth grout lines even with the surface of tiles first.
Yes, it is possible to install granite tiles over existing ceramic tile flooring, but it requires proper preparation and consideration. The ceramic tile surface should be thoroughly cleaned, and any loose or damaged tiles should be repaired or replaced. The surface should be level and free from any residue or debris. Applying a bonding agent or primer can improve adhesion. It's important to note that adding granite tiles will increase the height of the floor, so door clearances and transitions may need adjustment. Consulting with a professional installer or contractor can ensure proper installation and address any specific requirements or challenges.
You can lay tiles again but make sure you buy proper mortar. You can install any kind of floating floor such as laminate, engineering wood, interlocking vinyl tile. Your main concern should be structural integrity of existing floor, if its not falling you can do pretty much anything
nope
Ceramic. Ceramic.
I do not think that is a good idea.The rubber flooring should be removed and then new ceramic flooring should be laid on.
Yes, if the flooring is level, uncracked, and has no loose pieces. You will need to strip the surface of the slate to ensure no residue remains that would not allow the mortar to bond.
I have heard that metal tiles are the best for supporting heavy weights. I would recommend metal tiles over ceramic, as the ceramic tiles would probably crack easily.
yes.
To install vinyl flooring over tile, you will need to thoroughly clean and smooth the tile surface, apply a self-leveling compound if needed, and then use a vinyl flooring adhesive to secure the vinyl tiles or planks in place. It is important to follow the manufacturer's instructions and ensure that the tile surface is suitable for vinyl installation.
To apply peel and stick tiles over ceramic tile, first clean the surface thoroughly to remove any dirt or debris. Next, measure and cut the peel and stick tiles to fit the ceramic tile. Peel off the backing and press the tiles firmly onto the ceramic tile, smoothing out any air bubbles. Finally, use a roller to ensure the tiles are securely adhered to the ceramic tile surface.
To install tile over vinyl flooring, first clean and prepare the vinyl surface. Then, apply a layer of thin-set mortar and lay the tiles in the desired pattern. Allow the mortar to dry completely before grouting the tiles. Finally, seal the grout to finish the installation.