You have to remove front headlight piece (which is held by two screws). Once removed you will be able to see and reach the bulb connection on the back of the side marker. Hope this helps.....
To change the side marker light bulb on a 2001 Oldsmobile Aurora, first, locate the side marker assembly on the front fender. Gently pull the assembly away from the fender; you may need to use a flathead screwdriver to pry it out if it's stuck. Once removed, twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Reinsert the bulb socket, twist it to secure it, and snap the side marker assembly back into place.
You have to remove front headlight piece (which is held by two screws). Once removed you will be able to see and reach the bulb connection on the back of the side marker.
How do you replace 2001 Mercedes c320 front marker light
change bulbs in gear selector of 2001 oldsmobile aurora
Bulb for your turn signal, side marker on your car.
There is a shorted wire or bulb in that circuit.
I took a few screws out of the front wheel well mud guard behind the marker light and reached in through there to remove and replace the side marker light.
* Raise the car and suitably support it on jackstands * From below you can access both the turn signal and side marker lights * The side marker bulb holder pulls straight out of the socket and the turn signal bulb holder must be rotated to remove it
Open the hood and you will find 2 bolts to remove the entire headlight assembly. You can then replace the bulb.
* Raise the car and suitably support it on jackstands * From below you can access both the turn signal and side marker lights * The side marker bulb holder pulls straight out of the socket and the turn signal bulb holder must be rotated to remove it
To replace the license plate light bulb on a 2001 Oldsmobile Aurora, first, open the trunk and locate the license plate light assembly. Use a flathead screwdriver to gently pry off the lens cover. Remove the old bulb by twisting it counterclockwise, then insert the new bulb and twist it clockwise to secure it. Finally, snap the lens cover back into place and close the trunk.
where can I find a video on how to replace a 2006 rear SIDE MARKER bulb>