0
What else can I help you with?
What is a curved surface and a curved edge in geometry 5th grade level?
A curved surface is like imagining a sheet of paper that is bent or a flag waving in the wind. A curved edge is like an elastic stick bent in one(C curve) or more points(S curve). The curved surface beeing 3 dimensional(3D) and the curved edge 2 dimensional(2D) unlike the simple surface and edge which are 2D respectively 1D.
What means of the dumpy level and tilting level?
Most surveying instruments are mounted on a tripod with a flat surface on top. A tilting level tripod has a curved surface on top. The tripod does not need the precise set up procedure because the tilting level can be shifted up or down along the top of the curved tripod head until the levels own level vial is horizontal and then measurements can be made.
What is the tilting level in the surveying?
Most surveying instruments are mounted on a tripod with a flat surface on top. A tilting level tripod has a curved surface on top. The tripod does not need the precise set up procedure because the tilting level can be shifted up or down along the top of the curved tripod head until the levels own level vial is horizontal and then measurements can be made.
Is a level line curved or straight?
A level line is based on altitude. Altitude is the distance from sea level. Sea level is curved to the shape of the earth so a level line must be curved.
Should I try to repair leaks in an above-ground swimming pool myself?
If you want to know if your pool leaks. # Take a bucket of water from the pool. # mark the water level of the pool. # mark the water level in the bucket. # check to see how much the water has gone down after a couple of days in the pool and n the bucket. # If the level in the bucket is closer to the mark then the level in the pool there is water being lost some where. If there is no difference then there is no leak. The surface water on the bucket evaporates at the same rate as that on the pool, so the should stay the same.
How can you tell if your water level dropping is normal or a leak?
Fill a bucket with water, then mark the water level on the bucket with a waterproof marker. Set the bucket next to the pool. Next, mark the water level of the pool. After a couple of days, check the marks on the bucket and the pool. They should measure the same (having lost the same amount of water due to evaporation). If the pool level has dropped more than the level of water in the bucket, you have a leak somewhere. (By the way, make sure your dog hasn't drank out of the bucket, or pool!)
Does the surface around a golf cup hole have to be level?
No. it do not need to make to level ,and not this is already leveled
How can I determine how to find a leak in my pool?
To find a leak in your pool, you can conduct a simple bucket test. Fill a bucket with pool water and place it on the pool steps. Mark the water level inside the bucket and the pool water level. After 24 hours, compare the two levels. If the pool water level has dropped more than the bucket water level, you likely have a leak.
How can I detect a leak in a pool?
To detect a leak in a pool, you can perform a simple bucket test. Fill a bucket with pool water and place it on the pool steps. Mark the water level inside the bucket and the pool water level. After 24 hours, check if the water levels have changed. If the pool water level has dropped more than the bucket water level, it may indicate a leak.
How can I detect a leak in my pool?
To detect a leak in your pool, you can perform a simple bucket test. Fill a bucket with pool water and place it on the pool steps. Mark the water level inside the bucket and the pool water level. After 24 hours, compare the two levels. If the pool water level has dropped more than the bucket water level, it may indicate a leak.
How can I find a leak in an inground pool?
To find a leak in an inground pool, you can conduct a simple bucket test. Fill a bucket with pool water and place it on the pool steps. Mark the water level inside the bucket and the pool water level. After 24 hours, compare the two levels. If the pool water level has dropped more than the bucket water level, there may be a leak in the pool. You can also inspect the pool equipment, check for wet spots around the pool, and hire a professional leak detection service for further assistance.
My fiberglass pool has lost about 2 feet of water since I put the cover on it. What could be the problem?
Check to see if there is a leak in it. You can do this by taking the cover of the pool and marking the water level, then take a bucket of water mark the level on it. place the bucket next to the pool and leave it there for a few days. if the level in the pool drops the same as the level in the bucket then the reduction of water is the result of evaporation. however if the level in the pool drops more then the level in the bucket you are loosing water somewhere.
