See the two Related Questions to the left for the answer.The first is how to prepare a solution starting with a solid substance (and dissolving it). The second question is how to prepare a solution by diluting another solution.
To prepare a 30% sucrose solution, dissolve 30g of sucrose in enough water to make a total of 100mL solution. Measure out the correct amount of sucrose using a balance, then add water and stir until the sucrose is completely dissolved.
To prepare 6 nM ammonium hydroxide a 30 percent solution you need to know the volume of the 30 percent solution that you have and the volume of 6nM solution you would like to make. Then use the following formula: C1V1 = C2V2 where C = concentration in moles/Liter and V = volume in liters.
To prepare a 30% methanolic KOH solution, you would mix 30g of KOH with enough methanol to make a total solution volume of 100mL. This would result in a solution where 30% of the total weight comes from KOH. Be cautious when handling KOH as it is a caustic substance and should be handled with appropriate precautions.
To prepare a 30% NaOH solution, you would mix 30 grams of NaOH with enough water to make 100 grams of final solution. Be sure to use caution when handling NaOH as it is a caustic substance and can cause skin and eye irritation.
Well to make 30% stock solution of BSA from powder form you need to dissolve 30g of BSA into 100ml of solvent (water). Thus dissolved solution becomes 30% (w/v) stock solution.
144liters
A pharmacist mixed a 20 percent solution with a 30 percent solution to obtain 100 liters of a 24 percent solution. How much of the 20 percent solution did the pharmacist use in the mixture (in liters).
80 liters
10
210Type your answer here...
The chemist will use 100 liters of the 80% acid solution and 100 liters of the 30% acid solution to make a 200-liter solution that is 62% acid. The amount of acid in the 80% solution will be 0.8 * 100 = 80 liters, and in the 30% solution, it will be 0.3 * 100 = 30 liters.
To prepare a 3% solution of sulfosalicylic acid, you would need 30 grams of sulfosalicylic acid for every 1 liter of solution.