0
What else can I help you with?
What is the procedure for the standardization of sodium thiosulfate?
Thiosulfate can be standardised by adding excess potassium iodide solution to a known volume of a standard acidified solution of potassium dichromate, and then titrating the liberated iodine against the sodium thiosulfate solution.http://www.meduniv.lviv.ua/files/kafedry/tokshim/English/Analytical/Manuals_Analytchem/Iodometry.pdf
How do you prepare 0.01n sodium thiosulfate as per ip?
To prepare 0.01N sodium thiosulfate per Indian Pharmacopoeia (IP) standards, dissolve 25.3 grams of pure sodium thiosulfate pentahydrate (Na2S2O3·5H2O) in distilled water to make 1000 ml of solution. This solution will have a normality of 0.01N.
How do you 0.02 sodium thiosulfate prepared?
To prepare 0.02M sodium thiosulfate solution, weigh out the required amount of sodium thiosulfate pentahydrate (Na2S2O3·5H2O) or anhydrous sodium thiosulfate (Na2S2O3). Dissolve this in distilled water and make up the volume to the desired concentration. Make sure to use a volumetric flask for accuracy and precision in preparing the solution.
What solution is produced when water and sodium thiosulfate will mixed?
A solution of sodium thiosulfate is produced.
How do you prepare 0.01N solution of sodium thiosulphate?
To prepare a 0.01N solution of sodium thiosulfate, dissolve 2.48 grams of sodium thiosulfate pentahydrate (Na2S2O3·5H2O) in distilled water and make up the solution to 1 liter. This solution will be approximately 0.01N in strength. Remember to accurately weigh the compound and use a volumetric flask for precise dilution.
How do you prepare 0.002m sodium thiosulphate solution?
To prepare a 0.002M sodium thiosulfate solution, dissolve the appropriate amount of sodium thiosulfate pentahydrate (Na2S2O3·5H2O) in distilled water to make the desired volume of solution. Calculate the molarity using the formula M = (mol/L) and adjust as needed. Make sure to accurately measure and mix the components to ensure a homogeneous solution.
How do make 10 percent sodium thiosulfate solution?
To get 100g of solution: 10g of sodium thiosulfate + 90g of water.
How do you prepare 0.1N Na2S2O3 solution?
To prepare a 0.1N Na2S2O3 solution, dissolve 24.98 grams of Na2S2O3·5H2O (sodium thiosulfate pentahydrate) in distilled water and dilute to 1 liter in a volumetric flask. This will give you a 0.1N (normal) solution of Na2S2O3.
Why water cannot be used to prepare sodium thiosulphate solution?
One should use freshly boiled pure water to prevent oxidation by otherwise present oxygen. After complete solvation of the 'hypo' (more familiar known as the pentahydrate, Na2S2O3•5H2O) the solution should be filtered to after standing overnight to remove sparse sulfur sedimentation.
Is normality and molarity for sodium thiosulfate same?
No, normality and molarity are not the same for sodium thiosulfate. Molarity is a measure of the concentration of a solution based on the number of moles of solute per liter of solution, while normality is a measure of the concentration of a solution based on the equivalent weight of the solute. The normality of sodium thiosulfate will depend on the number of equivalents of the solute present in the solution.
How do you prepare hypo solution?
To prepare a hypo solution, dissolve sodium thiosulfate in water in a ratio of 1 part sodium thiosulfate to 5 parts water. Stir until completely dissolved. This solution is commonly used in photography to stop the development process.
How do you prepare N 80 thiosulphate?
To prepare N 80 thiosulfate, dissolve 80 grams of sodium thiosulfate pentahydrate (Na2S2O3·5H2O) in enough distilled water to make a final volume of 1 liter. Stir the solution until the thiosulfate is completely dissolved. Ensure that the solution is mixed well and store it in a properly labeled container. Always follow safety protocols when handling chemicals.
