0
Make sure you only take them out one at a time!
If you have taken them all out look at the valve stem- they should have the numbers 1,2, 3 on them.
Start with number 3 - (this is the one furthest away from your nose!!)
Each valve has a bar or plastic disc 'valve guide' this guides the valves into the correct position. Inside the valve case you will see little channels. Carefully guide the valve into the valve channels. If all else fails, place the valve into the case and gently turn the vale round until it clicks. Check the valve is in the correct place by blowing air through the Trumpet with the valve up and then with the valve pressed down.
Repeat with valves 1 and 2.
Make sure that your valves are clean- don't wipe with fluffy cloths- remember to wash off old valve oil before adding new oil.
SBM
What else can I help you with?
How do you put togetter a trumpet?
All you have to do is take the mouthpiece and put it into the hole at the end of the trumpet that's opposite of the bell.
How can I put valves in a trumpet?
To put valves in a trumpet, you need to carefully disassemble the trumpet, insert the valves into the valve casings, and then reassemble the trumpet ensuring the valves are properly aligned and functioning smoothly. It is important to follow the manufacturer's instructions and seek guidance from a professional if needed.
Where in the circulatory system are vavles found?
the heart?
Where should you put commas at in this sentence My favorite instrument the trumpet has a long history?
You should put a comma after "instrument" to separate the two independent clauses in the sentence: "My favorite instrument, the trumpet, has a long history."
When was the Selmer trumpet with serial number 78116 manufactured?
Best estimates put this trumpet as being manufactured after 1984.
Where do you put the serial code for an Anthem Trumpet?
on the bell
Why did the musician put his trumpet in the freezer?
He played it cool
When was the Holton 602 trumpet with serial number 930726 manufactured?
Best estimates put this trumpet as being manufactured after 1980.
When was the Selmer Bundy trumpet with serial number 929808 manufactured?
Best estimates put this trumpet as being manufactured after 1983.
When was the Selmer trumpet with serial number 10427 manufactured?
Best estimates put this trumpet as being manufactured around 1951-1952.
When was the Selmer trumpet with serial number 10003 manufactured?
Best estimates put this trumpet as being manufactured around 1951-1952.
When was the Selmer trumpet with serial number 10687 manufactured?
Best estimates put this trumpet as being manufactured around 1952-1953.
