It sounds to me like you have a big problem. The first step would probly be to remove the trap under the sink. If it was a small amount of wax it will probly be all in the trap. If it was a large amount of wax then your going to have a problem. I have only one other suggestion and that would be to keep a steady stream of boiling water down the drain. It will keep the wax melting and maybe take it all the way out of the drain sytem. On the other hand of it was a very large amount of wax you might have to try getting a drain snake and pushing it out. my last suggestion would cost the most and that would be to replace the drain sytem. good luck, shaun
Our 4 yr old dumbed about a cup and half of hot wax down our sink tonight. We removed the p trap and there it all was! We cleaned out trap and ran boiling hot water thru the sink...wahla! good as new! SASHA
To remove kitchen soffits in your home, you will need to first determine if they are load-bearing or not. If they are not load-bearing, you can remove them by carefully cutting and removing the drywall, framing, and any electrical or plumbing that may be inside. It is recommended to consult with a professional contractor or structural engineer before starting the removal process to ensure it is done safely and correctly.
To remove a kitchen sink drain, you will need to first disconnect the plumbing underneath the sink. This involves loosening the slip nuts and removing the P-trap. Once the plumbing is disconnected, you can then unscrew the locknut that holds the drain in place. After removing the locknut, you should be able to pull the drain out from the top of the sink.
To effectively remove a kitchen sink drain, you will need to first disconnect the plumbing underneath the sink, then use a wrench to loosen and remove the drain assembly. Be sure to follow safety precautions and turn off the water supply before starting.
To remove a kitchen sink, first turn off the water supply and disconnect the plumbing connections. Then, loosen the sink clips or mounting brackets holding the sink in place. Finally, carefully lift the sink out of the countertop and remove any remaining sealant or adhesive.
To remove a kitchen sink, first turn off the water supply and disconnect the plumbing connections. Next, loosen and remove the sink clips holding the sink in place. Finally, carefully lift the sink out of the countertop and clean up any remaining sealant or debris.
To remove a kitchen soffit, you will need to first determine if it is load-bearing or non-load-bearing. If it is non-load-bearing, you can remove it by carefully cutting and removing the drywall, framing, and any electrical or plumbing components within the soffit. It is important to consult with a professional contractor or structural engineer before attempting to remove a soffit to ensure it is done safely and correctly.
A wall drain in a building's plumbing system is designed to remove wastewater and prevent water damage by allowing water to flow out of the building through the wall instead of pooling inside.
Sometimes if you remove the drawer and use the wax of a candle on the track, it makes it roll smoother. (Beeswax is, historically, the standard)
To connect a kitchen sink hose adapter to your existing plumbing system, you will need to first turn off the water supply to the sink. Then, remove the existing aerator from the faucet and screw on the hose adapter. Make sure it is securely attached. Finally, connect the hose to the adapter and turn the water supply back on.
To remove the soffit in your kitchen, you will need to first locate any electrical wires or plumbing that may be running through it. Turn off the power to any electrical wires and shut off the water supply if necessary. Use a stud finder to locate the studs in the wall and ceiling that the soffit is attached to. Carefully remove any drywall or other materials covering the soffit. Use a reciprocating saw to cut through the soffit along the studs. Remove any insulation or other materials inside the soffit. Finally, remove the remaining pieces of the soffit and patch up any holes or damage left behind.
To remove red candle dye from carpet, you can start by blotting the area with a clean cloth to soak up as much of the dye as possible. Then, mix a solution of warm water and mild dish soap, and gently scrub the stained area with a sponge. Rinse with clean water and blot dry. Repeat as necessary until the dye stain is removed.
You have to contact the latest plumber or plumbing based company.