Visit our enthusiasts forum for complete instructions and help with the cluster. We have a how to to replace individual stepper motors that will save you many $$$
www.trailvoy.com
There is not a cable for the speedometer. The information is sent to the gauge cluster from the PCM. The PCM controls almost all aspects of the vehicle operation. All of the information on the gauge cluster comes from the PCM.
Remove instrument cluster in a 2003 olds aurora
2003-2008 located in the dash cluster by your speedometer. 2009 On the information cluster above the radio.
If the speedometer is not working but the odometer is, I would suspect the dash cluster is at fault. If both speedometer and odometer are not working I would suspect the speed sensor on the transmission is at fault.
the dashboard cluster could have broken. That happened to my 2004 trailblazer and I had to get it replaced
To remove the instrument cluster from a 2003 Renault Clio, first disconnect the car battery to ensure safety. Next, carefully remove the trim surrounding the cluster using appropriate tools to avoid damage. Unscrew any bolts securing the cluster, then gently pull it out. Finally, disconnect the electrical connectors at the back of the cluster to fully remove it.
To remove the gauge cluster on a 2003 Acura RSX, first, disconnect the negative battery terminal to ensure safety. Next, pry off the plastic trim surrounding the cluster, then remove the screws securing the gauge cluster in place. Carefully pull the cluster out, disconnect the wiring harnesses at the back, and you can then fully remove the cluster. Reinstalling is simply the reverse process.
look in your owners manual and it will tell you.
If both the speedometer and odometer stopped working it is probably the speed sensor in the transmission gone bad. If only the speedometer quit you may have to replace the dash cluster with a reconditioned unit.
You can't you have to replace the whole dashboard instrument cluster assy.
To remove the gauge cluster from a 2003 Dodge Ram, start by disconnecting the negative battery cable to ensure safety. Then, remove the trim bezel around the cluster by gently prying it off with a flat tool. Next, unscrew the screws securing the gauge cluster to the dashboard. Finally, carefully pull the cluster out, disconnect the wiring harnesses from the back, and remove it completely.
you need to replace dash illumination bulbs only problem the speedometer cluster has to be removed