answersLogoWhite

0

The 1988 Buick Skylark 2.3 liter engine serpentine belt tensioner pulley is held in place with a single retaining bolt. The retaining bolt will be in the center of the pulley. Remove the retaining bolt.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

Where does the camsensor go on a 1997 Buick lesabre?

Where does the camsensor go on a 1997 buick lesabre


How do you replace the fuel pump on a 1997 Buick LeSabre?

how do you replace the fuel pump on a 1997 buick lesabre


How to replace Alternator on 97 buick lesabre?

Remove the positive cable from your 1997 Buick LeSabre battery. Remove the alternator belt. Remove the alternator wiring harness. Remove the alternator retaining bolts. Reverse the process to install the new alternator.


What is the fault code P0336 on a 1997 Buick lesabre?

The P0336 fault code on 1997 Buick Lesabre is a fault in the crankshaft position sensor circuit.


Will the wheels on a 1997 buick lesabre fit a 1999 lesabre?

probably. go for it.


1997 Buick lesabre?

The 1997 Buick LeSabre is a mid-sized four door sedan. The vehicle retails for about 1000 dollars to about 6000 dollars depending on condition.


Will doors on a 1994 Buick Lesabre fit on a 1997 Buick lesabre?

1997, 98 and 99 lesabres are supposed to bigger inside so check with a dealer or wrecking yard.


How do you remove the starter on a 1997 Buick LeSabre?

To remove the starter on a 1997 Buick LeSabre, first disconnect the negative battery cable to prevent electrical shorts. Then, locate the starter, which is typically mounted on the engine near the transmission. Remove the electrical connections from the starter, followed by the mounting bolts securing it to the engine. Finally, carefully pull the starter out of its position and replace it if necessary.


What are the torque specs for 1999 Buick LeSabre front hub and wheel bearing?

118 ft lbs 1997-2004 Buick LeSabre


What size speakers are in the front of a 1997 buick lesabre?

5.25"


How many o2 sensors does a 1997 buick lesabre have?

4


How do you change a serpentine belt tension unit on a 1997 Buick Skylark?

Remove belt and tensioner should just be bolted to engine