You need to first remove the door trim. This is because one of the 3 mounting screws that hold the mirror on can only be accessed when the door panel is removed.
Remove the inside door panel of your 1993 Chevrolet Lumina. Remove the passenger mirror wiring harness. Remove the passenger mirror retaining bolts. Reverse the process to install the new passenger mirror.
uneed to price of the black cover and undoo the whole of the door panel then where the wing mirror is you need to undo the 3 screews and itshould pop straight out
Chevrolet Lumina. Remove the wiring harness or the mirror linkage. Remove the mirror retaining bolts. Reverse the process to install the new passenger side mirror.
remove the plastic panel and there are 3 ten mm nuts remove and replace mirror.
To replace the passenger side mirror on a Chrysler Voyager you need to first remove the window trim. Next, disconnect the wires and unscrew the mirror from the door. Reverse directions to replace with new mirror.
The passenger side mirror on a 2001 Toyota Sienna is mounted by screws. To replace the mirror remove the mounting screws and unplug the wire clip.
# Remove the door trim panel and watershield.Disconnect the electrical connector from the mirror # Remove the retaining nuts and detach the mirror from vehicle
* Remove the mirror trim cover from the door panel * Remove the three mirror retaining nuts and detach the mirror from the car
You have to remove door panel
Go to this website. It will show how to remove the door panel and the side mirror.
Remove the door panel and the mirror is held on with bolts.
you have to remove door panel and there are three nuts you have to take off of the mirror.