The 2002 Chevy Silverado dipstick tube is held in place with a retaining nut at the bottom of the dipstick tube. Loosen the retaining not in the dipstick tube will lift out.
To replace the dipstick tube on a 2002 Ford Focus, first ensure the engine is cool and disconnect the negative battery terminal. Remove the old dipstick tube by loosening any retaining bolts or clips, then carefully pull it out from the engine block. Insert the new dipstick tube into the same location, securing it with the bolts or clips, and finally, reconnect the battery terminal. Make sure to check the fit and ensure the dipstick slides smoothly in and out.
remove bolts and clip. Then remove oil dipstick tube.
To replace the oil dipstick tube on a Ford Mustang, first ensure the engine is cool and disconnect the negative battery cable. Remove the dipstick and any mounting bolts securing the tube to the engine block or intake manifold. Gently pull out the old dipstick tube, and lubricate the new tube's O-ring before inserting it into the engine. Finally, reattach any bolts, replace the dipstick, and reconnect the battery.
dipstick tube
Take the dipstick tube with you to the auto parts store, and see if they can match you up with one.
down the dipstick tube
Down the dipstick tube.
replacement of the transmission dipstick tub seal on a 1994 s10 blazer
To replace a broken dipstick in a 2006 Chevy Express 1500, first, ensure the engine is cool and remove any debris around the dipstick tube. Pull the broken dipstick out carefully, making sure no pieces are left in the tube. Insert the new dipstick fully into the tube until it seats properly. Finally, check the oil level using the new dipstick to ensure it’s at the correct level.
Down the dipstick tube.
can you see any of the stick? or is it down inside the tube? dave tradertaippan@yahoo.com Drain oil, remove lower sump pan,drift out broken dipstick tube & replace with new tube.
To replace the oil dipstick tube on a 2005 Dodge Durango with a 4.7L engine, first, ensure the engine is cool and disconnect the negative battery terminal. Remove any obstructing components, such as the air intake or other hoses, to access the dipstick tube. Unscrew the tube from the engine block and carefully pull it out; then, insert the new dipstick tube, securing it tightly. Finally, reassemble any removed parts and reconnect the battery.