Pound your 2002 Suzuki left front wheel studs out. You will need to pound in the new studs in the same manner that you removed the old studs.
You replace the wheel bearing hub assembly - it has studs, bearings and wheel speed sensor around $100 part
I belive they are the knock out type take off wheel and drum heat studs on the back hit from front. to replace put new studs in and put back on tires.
You have to have the hub pressed out of the knuckle to replace the wheel studs.
You need to get the rotor off to replace studs with new ones.
Remove the brake drum, drive out he damaged studs from the front of the drum, press in the new ones from the back of the drum, reinstall the drum.
To replace the front lug studs on a 1995 Acura TL, first lift the vehicle and remove the front wheel. Then, remove the brake caliper and rotor to access the hub. Use a hammer to drive out the old lug studs from the hub, then insert the new studs and secure them in place with lug nuts, tightening them evenly. Finally, reassemble the brake components, reinstall the wheel, and lower the vehicle.
you dont
You have to remove the caliper and then the rotor and tap on the front of the stud with a hammer so that it slides out from the back.
The 2010 Suzuki SX4 has front wheel drive.
The 2013 Suzuki Kizashi has front wheel drive.
The 2011 Suzuki SX4 has front wheel drive.
The 2008 Suzuki SX4 has front wheel drive.