0
What else can I help you with?
How do you replace left front wheel studs on my 2002 suzuki xl7?
Pound your 2002 Suzuki left front wheel studs out. You will need to pound in the new studs in the same manner that you removed the old studs.
How do you Replace front wheel studs on 2000 Montana?
You replace the wheel bearing hub assembly - it has studs, bearings and wheel speed sensor around $100 part
How do i replace front studs on my 1999 Honda accord?
Front studs on a 1999 Honda Accord are pressed in. First the studs must be removed using a hammer or press. Once remove each stud can be pressed in.
How do you replace wheel studs on a 95 Chevy s-10?
I belive they are the knock out type take off wheel and drum heat studs on the back hit from front. to replace put new studs in and put back on tires.
How do you replace front wheel studs on 1962 pontiac catalina?
Remove the brake drum, drive out he damaged studs from the front of the drum, press in the new ones from the back of the drum, reinstall the drum.
How do you replace a front wheel lug stud on a 1995 Geo Tracker?
You need to get the rotor off to replace studs with new ones.
How do you replace the front lug studs on a 1995 Acura TL?
To replace the front lug studs on a 1995 Acura TL, first lift the vehicle and remove the front wheel. Then, remove the brake caliper and rotor to access the hub. Use a hammer to drive out the old lug studs from the hub, then insert the new studs and secure them in place with lug nuts, tightening them evenly. Finally, reassemble the brake components, reinstall the wheel, and lower the vehicle.
How do you replace wheel studs on a sebring?
You have to remove the caliper and then the rotor and tap on the front of the stud with a hammer so that it slides out from the back.
How do you replace the wheel lug studs on a 1995 Ford Escort lx?
You have to have the hub pressed out of the knuckle to replace the wheel studs.
Replace exhaust donut on a 1991 Nissan Maxima?
You're going to have to drop both front and rear manifold connections. Should be 3 studs in the front manifold & 3 in the rear. Replace both o ring gaskets while you're in there. If the nuts on the studs are corroded then you might want to take it in to get it done because if you break a stud you will have more problems and higher cost to repair it. If you have accessto a cutting torch heat up the manifold to remove the studs or heat up the nuts as not to break the studs.
How do change the front tire wheel studs on a 1994 Seville?
How do you change front tire studs on a 1994 Seville sts
How do you replace headlight bulbs on a 99 Tahoe?
First open the hood and locate the 5mm studs in front of the headlight you wish to replace. Remove the studs and gently pull out the headlight assembly. Remove the headlight assembly by twisting the connectors counter-clockwise. Remove the old bulbs from the assembly and replace with the new bulbs. Reconnect the assembly by attaching the connectors and twisting clockwise. Reinsert the assembly and and attach with the 5mm studs. Close the hood.
