0
What else can I help you with?
How do you change the front wheel bearings on a 19999 Saturn SC?
The bearings are pressed into the knuckle so you have to remove the knuckle and then press out the hub (wheel studs) and then remove the clip and press out the bearing cant do it unless you have a 10 tonne press
How do you remove studs from front wheel from a 1996 Monte Carlo z34?
To remove the wheel studs from the front wheel of a 1996 Monte Carlo Z34, first, lift the car and secure it on jack stands. Remove the wheel and brake caliper, then take off the brake rotor. You can then use a hammer or a press to gently tap or push the studs out from behind the hub assembly. If necessary, you may need to remove the hub to access the studs more easily.
How do you remove the wheel studs from the front axle of a 1993 Civic EX?
www.honda-tech.com yw.
How to remove front rotor on 93 F 350 truck dually?
On my '90, the rotors are held in place by the wheel studs. I had to press the wheel studs out, then the rotor separated from the hub.
How do you get the studs off a 1997 Nissan pickup front wheel?
do you want to remove the actual studs or remove the lug nuts? the lug nuts may have left hand thread which means they go clockwise to loosen if you mean remove actual studs, u need to remove wheel. the studs will knock out with a hammer. you will need to replace with new ones
How do you remove studs on civic 98?
wheel studs? head studs?
How do you remove front rotors on 2001 Kia Rio?
you need to remove the front calipers then remove two Phillips head countersunk screws that are in the middle of the wheel studs
How do you replace front wheel studs on 1962 pontiac catalina?
Remove the brake drum, drive out he damaged studs from the front of the drum, press in the new ones from the back of the drum, reinstall the drum.
How do you replace left front wheel studs on my 2002 suzuki xl7?
Pound your 2002 Suzuki left front wheel studs out. You will need to pound in the new studs in the same manner that you removed the old studs.
Removal of front lug studs on a 94 Acura Integra?
Lug studs on a 1994 Acura Integra is pressed into the hub. To remove the lug studs safely raise and prop the car. Remove the wheel, brake components, and suspension parts from the hub. Press out the old studs.
How do you replace the front lug studs on a 1995 Acura TL?
To replace the front lug studs on a 1995 Acura TL, first lift the vehicle and remove the front wheel. Then, remove the brake caliper and rotor to access the hub. Use a hammer to drive out the old lug studs from the hub, then insert the new studs and secure them in place with lug nuts, tightening them evenly. Finally, reassemble the brake components, reinstall the wheel, and lower the vehicle.
Do you have to repack the wheel bearing on a 2004 Jeep Liberty if you replace the brake rotors?
No, you can remove and/or replace the front rotors on your Jeep Liberty without having to repack the wheel bearings. To remove the rotor, remove the brake caliper, and then pull the rotor straight off the wheel studs. If the rotor doesn't budge, then use an air hammer to tap the front face of the rotor adjacent to the wheel studs (the flat area of the rotor directly between the wheel studs). This will knock the rust loose and let the rotor slip off the studs. DO NOT use the air hammer on the braking [shiny] surface of the rotor!
