Put your truck up on jacks. Loosen the lug nuts on the wheel and then remove them. Remove the tire so you have access to the ball joints. Use a pair of pliers to remove the cotter pins. Place a ball joint separator between the ball joint and the steering knuckle and then hammer it until it pops loose. Remove the old ball joints and then replace them with the new ones.
To replace lower front ball joints in a 1996 Jimmy, raise the front of the car. Grease both ball joints and install the spindle. Next, place the spindle over the ball joints.
drive it to pep boys
How do you change the lower ball joints on an 2004 envoy
You change the control arms, upper and lower. The ball joints are manufactured into the control arms.
How to change upper and lower ball joints on a 1997 ford explorer all wheel drive?
Change lower ball joints on a 96 gmC 4 by 4
You have to change the whole lower control arm.
You can not just change the ball joint , you have to replace the whole lower control arm with ball joint.
Ball joints.....One upper and one lower at each front wheel. For a total of 4.
The lower ball joints have to be pressed out. The upper ball joints are part of the control arm, so the complete upper assembly has to be replaced.
how do i change a lower ball joint on a 1992 ranger 2wd
WWW.AutomotiveFourms.com
Drive it to the local garage and pay to have it done.
What year, if it has upper it has to be pre 1989