The bulbs can be replaced for the radio and heater controls on a 2000 Windstar SE by removing the plate over the heater controls. Some models need an Allen wrench for this and some models will need a Star wrench to remove the screws holding this plate on.
Remove the cover around the controls and you will see the bulbs inside the climate control unit. It just pulls off.
Follow the Youtube video.
Take your car to the dealer or body shop.
The best place to get bulbs for behind the heater controls on a 2000 diesel Grand Vitara is directly from the manufacturer. An order can also be placed through a local dealer or auto parts store.
Turn signal 'what'?If bulbs, See "Related Questions" below for specific instructions for replacing front and rear bulbs, and fuse location.
Look on the inside of the liftgate and you'll spot a plastic trim panel/piece directly behind the High Mount brake light. Gently pry this piece off and you'll have access to the bulb and socket.
You need to remove the dash in order to get back there to replace any blown bulbs.
pull the dash clusture and remove bulb locks behind it
remove dashboard and replace 2 bulbs behind it
The bulbs are replaceable behind the lens, so the lens (two screws for the front and 4 for the back) must be removed to change the bulbs.
check bulbs, fuses & reverse switch
To replace the light bulbs for the heater controls on a 2011 Renault Trafic, first, ensure the vehicle is turned off and the keys are removed. Carefully remove the surrounding trim or panel to access the heater control unit. Unscrew or unclip the heater control assembly, then replace the burnt-out bulbs by twisting them out and inserting new ones. Reassemble the unit and trim, ensuring everything is securely in place before testing the new lights.