To replace the sway bar bushings on a 2004 Mercury Mountaineer, first, safely lift and secure the vehicle on jack stands. Remove the sway bar end links using a wrench and socket, then unbolt the sway bar from its mounting brackets on the frame. Replace the old bushings with new ones, ensuring they fit snugly, then reattach the sway bar and end links in reverse order. Finally, lower the vehicle and check for any noise or movement to ensure proper installation.
On a 2004 Mercury Mountaineer : The ELECTRIC fuel pump is INSIDE the gas tank
According to the 2004 Mercury Mountaineer Owner Guide : ( 22.5 U.S. gallons )
fuel gauge not working and power windows and radio.2004 mercury mountaineer.
wheel bearings mountaineer 2004
A door panel on a 2004 Mercury Mountaineer is held on by several screws. Once all the screws are removed the panel can easily come off.
# 24 is a 15 amp fuse for the cigarette lighter , OBD II , in the passenger compartment fuse panel of a 2004 Mercury Mountaineer
Starting with the 2002 model , there is no automatic transmission fluid dipstick on the Mercury Mountaineer ( and the Ford Explorer , 4 door )
Disconnect the negative side of the battery
Max capacity is 22.5 gallons.
My front wheel bearings just went in my 04 mountaineer, and we tried to replace them ourselves, but in order to get to the bearings you have to have the truck up on a lift, so unfortunately we had to send it to a mechanic.
Replace the hinge pins and bushings.
mercury mountaineer 2004 24 inch wheels