What ever you do, make sure the new one has the brackets intact that fix it to the wheel arch, i didnt, big problems
No it won't I'm afraid, they're just too different.
yes mate it will no modifications will be needed at all. the zetec -s body kit fits directly onto mk1 and mk2 mondeo's |The "Zetec S" bumper will fit the zetec engined models but will not fit the V6 as the exhaust exit for the V6 is on the right hand side. So in a nutshell Zetec S (RSAP) rear bumper will fit the 2.0, 1.8 & 1.6 models (exhaust on left) and the ST24 (RSAP) bumper will fit the V6 (exhaust on right) It also depends on model of car. Only the Saloon and Hatchback are interchangeable, the estate bumpers are completley different Hope it helps :-)
just been chating to a bloke around the corner he has a mark 1 mondeo and changed his bumper.Taking it of if fiddley 4 bolts at the bottom and screws at the side. You might have to drop your exhaust a bit to get at bolt
Try the Haynes Manual.
depends on the shape of your mondeo
easy, remove 2 bolts on each side underneath,slide it off backwards making sure you dont lose or bend guides, slide new one on and put bolts back in 10 min job
Try mirez.co.uk . There is a list of fuse no's under general info
just take the door card off and unscrew the speaker!
Yes, it is behind the rear nearside light cluster. Just remove the panels and it will be a little orange plastic box prably clipped onto the body wrok by the hole to get to the rear of the lights.
Nope
Depends on which relay switch however main relay switches on a ford Mondeo mk2 are usually found in the fuse box under the bonnet at the rear of the battery The fuse box is usually a large black box with a clip and hinge
Not easily, One bolt at the top of the head light and but the other two at located behind the bumper, so that's got to come off.