https://radio-navicode.Honda.com/
-This web site requires you know the serial number for your radio and Navi if applicable. The serial number for the radio can be obtained by holding the preset buttons 1 and 6 then pushing the radio power knob. The Navi serial number is found by locating the sticker on the navi unit where you insert the DVD ROM (on a 2005 Odyssey it is under the drivers seat). The sticker is on the bottom of the unit so use a mirror and a flashlight to read the serial number. Once you have these go to the website above and you are set! Don't bother with a dealership they will not help over the phone and want to charge you or take your navi unit out to get the serial number which is NOT necessary!
how do i get a code for my 2007 honda odyssey 2007 if i have the serial for the radio
try disconnecting the battery for an hour
There is a 5 digit code in the glove box.
The code A123, in your 2008 Honda Odyssey, is a reference that the air filter may need to be changed. A code should reset after changing the air filter.
There is nothing to reset except the radio. Insert the 5 digit radio code to reset the radio and then reset the clock and presets for stations.
check your glovebox, there should be sticker with a 5 digits
To reset the A12 code on a 2010 Honda Odyssey, start by turning the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off and then back to "ON." The maintenance light should reset, and the A12 code will no longer display.
The only way to reset the code on a 2004 Nissan Maxima's anti theft system is by taking it to the dealership.
To obtain the navigation code for a 2004 Acura MDX, you can check the owner's manual, where the code is often written on a card. If it's not there, contact an Acura dealership with your vehicle's VIN; they can provide the code after verifying ownership. Alternatively, if you have the original navigation system, you may find the code displayed on the screen after entering the wrong code multiple times.
4.6 Quarts including the filter - Assuming a 2004 HONDA ODYSSEY with 3.5L 6-cyl Engine Code J35A4
To reset the code in a 2006 Honda Odyssey after changing the battery, you typically need to enter the radio or anti-theft code. First, turn on the ignition without starting the engine. Then, if the radio displays "Code," enter the correct code using the preset buttons. If you don't have the code, you can find it in the owner’s manual or by contacting a Honda dealer with your vehicle's VIN.
The navigation reset code for a 2003 Acura MDX is typically found in the owner's manual or on a card that may have been provided with the vehicle's documentation. If you can't find it there, you may also check inside the glove compartment or on the back of the navigation unit itself. Additionally, some Acura dealerships can provide the code if you supply your vehicle identification number (VIN).