0
The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service: Switch ignition OFF.
Press and hold down the trip odometer reset button (at the lower right of the instrument cluster).
Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON.
The trip mileage area now displays "Service OIL".
If trip odometer reset button is now pressed again, the display turns to "Service INSP". Pressing the button again will cycle the display back to "Service OIL".
When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to "Service ----". That reminder is now reset.
The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again.
Switch ignition OFF and back ON to resume normal display.
What else can I help you with?
BMW e39 oil inspection reset?
To reset the e39 oil inspection light, a special reset tool is needed. The tool is plugged in the data port under the hood, and it will allow the computer to reset the light.
How do you reset the inspection light on combo van?
a special reset tool is needed
How do you reset oil light on 1989 BMW 325i?
Reset inspection light on 1989 bmw 325i
How do you reset periodic inspection of proton suprima s?
To reset the periodic inspection reminder on a Proton Suprima S, you typically need to locate the inspection reset function in the vehicle's onboard computer system. This can usually be done through the infotainment system or dashboard settings. If you're unsure, consult the owner's manual for specific instructions or visit a Proton service center for assistance. Always ensure that the vehicle's inspection and maintenance are up to date before resetting any reminders.
How do you reset code 82 service inspection light on vauxhall meriva 2010?
Just press the trip reset button
Will airbag light on pass the safety inspection in Texas?
No, if you air bag light is on or showing an error in Texas your car will not pass inspection. In some cases the light comes on for no reason and just needs to be reset.
Does check engine light on mean the computers is reset to ready for emissions so i can apply for waiver after after inspection?
No
How do you turn inspection light off 2005 Holden barina?
To turn off inspection light on a 2005 Holden Barina, press down the trip reset. Then place the key into the ignition and turn to first stop while holding down reset for 10 seconds.?æ
How do you reset the engine service light on a 98 Ford Escort?
Unplug the battery for 15 mins will reset the check engine light, but watch will reset all your sensors to. Personal experience it will not read for at least 100 miles, so dont do it when you need an inspection
How do you pass an inspection with check engine light on in a 97 dodge neon?
you don't. find out what the code means, and get it fixed. You cannot simply: unplug the light, it has to light for the preliminary inspection, and the code will still be there and will be found when they hook your car up to a scan tool; reset the car, the sensors have to reset the monitors before you take it in which will kick you out for the monitors not being ready.
How do you reset the service engine soon light on a BMW?
disconnect the negative battery cable, wait a couple hours, then reconnect. If you are trying to reset the inspection service light you will need to take it to someone or get on a board for model specific info.
To pass inspection how many miles after check engine light has been reset to you need to drive?
50 to 100 miles
