Resetting the maintenance light on a 1998 Odyssey is very easy to do. All you need to do is hold the reset button down and then turn the ignition on at the same time. The button will need to be held for 10 seconds.
To reset the maintenance required light in a 2012 Honda Odyssey, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After this, the maintenance light should turn off, indicating that the reset was successful. If it doesn't turn off, repeat the process.
maintenance with engine
This works for a 2000 Honda Odyssey - it may also work for a 2002...try it.Of course you are free to have the service performed anywhere you like. It is not required that the services be performed at the dealer. As for the Maintenance Required Light, you, or your mechanic, can reset it. Here's how to reset the light:Turn off the engine.Press and hold the select/reset button in the instrument panel, then turn the ignition switch ON (Position II).Hold the button for at least 10 seconds, until the indicator resets.That's all there is to it.
The maintenance light,You will need to take it to a Dodge dealer to reset it. Or get a DBR-2 code scanner.BIG $$$
aperantly take the light out
The maintenance required light requires a scan tool to be reset.
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
To reset the maintenance required warning light on a 1989 Dodge Dakota, unhook the battery connector cables for 10 minutes. Reconnect them and start the vehicle.
With the engine and ignition off push and hold in the odometer reset button. While holding that button in, turn on the ignition but do not start the engine. After about 5 seconds the light will go off and the maintenance required light will have been reset.
To reset the maintenance required light in a 2007 Toyota, first, turn the ignition switch to the "OFF" position. Then, press and hold the trip meter reset button while turning the ignition to the "ON" position (do not start the engine). Continue holding the button until the maintenance light flashes and then turns off. Release the button, and the light should be reset.
How do you reset the maintenance light on a 2001 Honda accord ex I found some options at http://www.tegger.com/hondafaq/maintenance-reqd-light.html#why
i tried all procedures, and mine still won't go off!