i tried all procedures, and mine still won't go off!
To reset the maintenance required light in a 2012 Honda Odyssey, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After this, the maintenance light should turn off, indicating that the reset was successful. If it doesn't turn off, repeat the process.
get your brakes fixed....
Honda's maintenance minder says to, "refer to Civic Sedan's owner's manual."
How do you reset the maintenance light on a 2001 Honda accord ex I found some options at http://www.tegger.com/hondafaq/maintenance-reqd-light.html#why
its not a light,reset with your key
To reset the A12 code on a 2010 Honda Odyssey, start by turning the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off and then back to "ON." The maintenance light should reset, and the A12 code will no longer display.
This works for a 2000 Honda Odyssey - it may also work for a 2002...try it.Of course you are free to have the service performed anywhere you like. It is not required that the services be performed at the dealer. As for the Maintenance Required Light, you, or your mechanic, can reset it. Here's how to reset the light:Turn off the engine.Press and hold the select/reset button in the instrument panel, then turn the ignition switch ON (Position II).Hold the button for at least 10 seconds, until the indicator resets.That's all there is to it.
You can't reset that light...there is no such thing as a 2002 Honda Element...they didn't come out until 2003.
Resetting the maintenance light on a 1998 Odyssey is very easy to do. All you need to do is hold the reset button down and then turn the ignition on at the same time. The button will need to be held for 10 seconds.
To reset the oil light on a 2016 Honda Odyssey, first turn the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, then navigate to "Vehicle Settings." Select "Maintenance," then choose "Oil Life." Finally, select "Reset" to clear the oil life indicator. Make sure to confirm the reset if prompted.
If the Odyssey uses the same routine as a Toyota, reset is accomplished by setting the mileage meter to total [as opposed to Trip A, Trip B] and then turning the ignition key to off. Then, holding the mileage reset button down, turning the ignition switch back on...continuing to hold the reset button .... in 5-10 seconds the maintenance 'reminder' light should go out.
To reset the wrench light on a Honda Odyssey after an oil change, turn on the ignition without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn off the ignition. When you start the vehicle again, the wrench light should be reset.