i found that you hit the mode button (bottom left one) 3x's
time shows on screen
then hold in the lap/reset buttom ( bottom right) about 3 seconds
set shows on the screen and then let go
then the seconds flash
hit st/stop to reset the seconds to zero or
mode button to change to the mins to flashing
hit st/stop to advance the numbers
hit mode to change to hour to flashing
hit st/stop to advance the numbers
There are four buttons. The Light button just turns on the back-light.Buttons FunctionLight Back-lightS1 = Lap/Reset Display when alarm is setS2 = St/Stop Display dateS3 = Mode Toggle time, stopwatch, alarm set, time set modesNormal time modeHold S1+S2 Toggle alarm on/offHold S1+S3 Toggle hourly chime. If days displayed, chime is on, If no days displayed, chime is offHold S3+ S1 to select which hr, min, date to be blinking, then don't remove s3, relive s1 and press S2 to set the required value.just go to "s3" the one where you can change from time to stopwatch ... and when the second thing is blinking press the "s2" which tells you the date
how do I set time on a wal mart aw watch
How do you set the time & date on diesel watch DZ-7069
digitel time set
To set the time on a Gucci wrist watch you simply pull the crown out to the middle position. You can then move the time clockwise or counter clockwise to set the correct time. Once you have the time set, push the crown back in to start the watch.
howdo you set the time on a hotaru LED watch
Press (s1) Mode button 3 times to get into your clock settings Then press (s2) lap/reset button 2 times. You will see that the hour flashes While it is flashing press the (s3) st/stop button several times until you see either a P (for PM) or A (for AM) on the upper right. If you see an H, you will set it at military time.
how do i set my active intent watch ?? tw2461 sr626sw/cr2016
Breitling watch info at link
depends on the watch.
To set the time on a Charles Raymond watch, locate the crown on the side of the watch. Pull the crown out to its second position and rotate it to adjust the time. Once the correct time is set, push the crown back in to its original position.
as simple as that