How do you set time on a acqua indiglo 30m watch?

Answer 1

Hold the mode button down until setting changes to alarm and starts flashing.

Press the mode button again to switch to time. Use the SPL/Reset and ST/STOP buttons to change the time and switch between the seconds, minutes, hours, date, month, day.

Press the mode button again to make it stop flashing. And your time should be set.

Answer 2

Press and hold the MODE button (bottom left) for approximately 3 seconds.

When the Alarm set time starts flashing, you can use the SPL./RET. button (bottom right) to toggle through the alarms hour.

To switch between the hour and minute alarm options, simpy press the ST./STP. button (top right).

Answer 3

1. press MODE (SP mode ON)

2. press MODE (AL mode ON)

3. press start/stop (chime off & alarm on)

4. press start/stop (chime on & alarm on)

5. press start/stop (chime on & alarm off)

Answer 4

in the normal time mode, hold down the left button and then press the right button to toggle on/off the hourly alarm and other alarm...