To set the time, depress the MODE button until the TIME option appears. Then press the SET button, followed by MODE again. Then, press the START/STOP button to set the correct hour. Press MODE again and use START/STOP again to set the minutes.
To set the time on a Timex Indiglo night light watch, first, pull the crown (the small knob on the side) out to the second position. Then, turn the crown to adjust the hour and minute hands to the correct time. Once set, push the crown back in to finalize the adjustment. For some models, you may need to hold down a button to activate the setting mode.
To set the date on a Timex Indiglo watch, first, pull the crown (the small knob on the side of the watch) out to the second position. Turn the crown clockwise until the desired date is displayed in the date window. Push the crown back in to its original position to set the date. Remember to adjust the time as needed after setting the date to ensure accuracy.
To set the time on your Timex tide temp watch, press and hold the "mode" button until the time digits start flashing. Use the "advance" and "select" buttons to adjust the hours, minutes, and date. To set the tide and temperature functions, refer to the user manual which can guide you through the specific steps.
Hold down the set button when it is in the normal mode (where it shows the time and date) (this button should be labeled, if not then try the upper left button). Then wait a little while until it comes up saying "TIME", at this point press the "next" button, which is normally what is labeled (not on the screen) as "Mode". You will then get to the screen with the time and date. Continue pressing the "next"/"mode" button until you get to the day, then set the day with the "start/spilt"/"+" and the "stop/reset"/"-" button. Once that is done press mode again and you get to the date which you set the same way as the day. When done press the "done"/"set" button. Sorry, these directions are kinda confusing, but its hard to explain these things.
To set the compass on your Timex Expedition E-Tide Temp watch, press the mode button until you reach the compass mode. Next, rotate the watch horizontally a few times to calibrate the compass. Once calibrated, point the watch's 12 o'clock position towards the North to use the compass feature.
To set the time on a Timex Indiglo night light watch, first, pull the crown (the small knob on the side) out to the second position. Then, turn the crown to adjust the hour and minute hands to the correct time. Once set, push the crown back in to finalize the adjustment. For some models, you may need to hold down a button to activate the setting mode.
If it's new, set the date/time and then demo mode will cease. If it's older, replace the battery.
To set the date on a Timex Indiglo watch, first, pull the crown (the small knob on the side of the watch) out to the second position. Turn the crown clockwise until the desired date is displayed in the date window. Push the crown back in to its original position to set the date. Remember to adjust the time as needed after setting the date to ensure accuracy.
To turn off the alarm on your Timex Indiglo watch, press the "Mode" button until you reach the alarm setting. Once in the alarm mode, press the "Set" button to toggle the alarm on or off. You may also need to adjust the alarm time if necessary. After making your adjustments, press the "Mode" button again to exit and save your changes.
set time timex t123s
dont know
:D
Oh, dude, setting the time on a Timex Indiglo watch is like a walk in the park. Just pull out the crown, twist it to adjust the time, and push it back in. It's so easy, even a sloth could do it. Just make sure you're not setting the time for a time-traveling adventure or something.
It is automatically set when GPS signal is acquired.
To change your Timex Indiglo digital watch from military time to standard time, you will need to access the watch's settings menu. Typically, this involves pressing and holding a specific button, such as the mode or set button, until the display starts blinking. Then, you can cycle through the available time formats using the appropriate buttons until you reach the standard 12-hour format. Finally, confirm your selection by pressing the appropriate button to save the changes. Refer to your watch's user manual for specific instructions tailored to your model.
To turn the alarm off once it has started ringing you can push the left button on the bottom of the watch. If you are trying to set the alarm so it does not ring at all, I cannot help - I need that infomration.
One way to set the time on a Timex is to press the mode button on the watch until it displays the time. Press set button and than the start/split button to change the time. Press the stop/reset button to decrease and press the set button again to set the time. Please refer to the related link for more information.