first you have to take the windshield out.Then you take the 6 screws out of the top ,then you loosen 2 side bolts under the dash by each kick panel.Then you tip it back toward you and unhook all your heater cables and wiring plugs by the kick panel on drivers side.Unhook speedometer cable.Then unhook door light switches on both side and it should lift out.
The lug pattern for 69 Dart is 5x4" original.
Yes, 1967, 1968 and 1969 barracudas have the same dashpad, algo you could get a 1968-1969 dart GTS (only GTS) and also fit your application. Reference: Me (1969 barracuda owner) No a 1968 barracuda/dart dash pad is different then a 67 or 69.
Yes
There are about 69 in the a1 and about 76 in the a2 and a3 models.
the dart was pretty popular from 64 through 74, I would say the 68-69-70 were the most popular.
go to manheimgold.com and look up the price.
S&W never made a Model 69 semi-auto pistol
I doubt very much that the wiring would interchange.
No, there too big.
Yes, they fit, but you will have to use the respective year grilles as the head light positions are different, with the 69 headlights higher and further towards the grille center than the 67/68 fenders.
With different fender contours it would not be an exact fit
no, the 69's didn't have spoilers, that started on 1970 darts.