you must to lock the bridge block with a couple of pieces of wood o whatever, but put atention in the correct bridge angle, now you can tune perfectly you guitar, after this unlock the bridge. you must to lock the bridge block with a couple of pieces of wood o whatever, but put atention in the correct bridge angle, now you can tune perfectly you guitar, after this unlock the bridge.
Your Floyd Rose tremolo system may not stay in tune due to issues such as improper string stretching, incorrect spring tension, or a problem with the locking nut. It is important to properly set up and maintain your tremolo system to ensure it stays in tune.
dont tell me what to do
The function of a Floyd Rose Tremolo is to help keep a guitarist in tune even in extreme changes in pitch. Its locking design is considered to be revolutionary.
Floyd Rose bridges are known for their ability to stay in tune very well, even with heavy use of the tremolo bar.
A tremolo arm is what allows one to use a tremolo. A tremolo is a mechanism in a stringed instrument that allows changing the pitch of all the strings simultaneously. The major drawback of a tremolo is that large amounts of use will stretch the strings and throw the instrument out of tune, requiring the player to have to continually retune the instrument. The idea behind the Floyd Rose brand tremolo is to alleviate this problem by locking the strings at both the nut and the bridge. More details on the Wikipedia page here: http://en.wikipedia.org/wiki/Floyd_Rose
Edge - 2009 III was released on: USA: October 2009
To properly install and set up a flush mount Floyd Rose tremolo system on a guitar, you need to carefully follow the manufacturer's instructions. This typically involves routing a cavity in the guitar body for the tremolo, installing the tremolo unit, adjusting the spring tension, setting the bridge height and intonation, and tuning the guitar. It's important to take your time and make precise adjustments to ensure the tremolo functions correctly and stays in tune.
E.g a tune-o-matic Doesn't float. No tremolo. etc Like a good old Gibson Les Paul.
A guitar with a Floyd Rose recessed tremolo system allows for more stable tuning, increased sustain, and the ability to perform extreme pitch bends and dive bombs without going out of tune.
The Edge Pro Licensed Floyd Rose is by far the best LFR bridge. The newer Edge Zero LFR bridge is quite good also but it is quite early to compare them with the older Edge Pro unit. The Edge Zero is just like a hybrid between the Edge Pro and the ZR (Zero Resitance) bridge system found in the S Series Ibanez guitar. The Edge Zero has the same knife edge as the Edge Pro with the improved tuners found in the S prestige bridge tremolo unit -minus the ball bearing as a pivot. The main upgrade would be the Patented ZPS3 spring system allows for the most radical of trem effects. The ZPS-3 acts as a Zero Point System so you won't lose your tuning once a string breaks.
Things contributing to guitars going out of tune include: A badly cut, none lubricated nut A bad tremolo system Bad tuners Using a lot of vibrato Soo if the "junior" (whatever you mean. Gibson Les Paul Junior, 3/4 size guitar etc?) has a decent nut, tremolo and tuners it should stay in tune reasonably well.
To properly set up a guitar with a Floyd Rose tremolo system, you need to adjust the bridge height, string tension, and spring tension to ensure the guitar stays in tune and the tremolo functions smoothly. This involves balancing the tension between the strings and the tremolo springs, as well as adjusting the bridge angle and intonation. It's important to make small adjustments and test the tuning frequently to achieve the desired setup.