0
You have to use a pulley puller that you can find at many parts stores or order on-line. Do not hammer the pulley onto the new pump or you will damage it. Use an installer or the bolt, nut and washer that comes with many replacement P.S. pumps to press the pulley on the shaft, making sure it is pressed on as far as it was on the old one was so the belt will be properly aligned.
What else can I help you with?
What type of tool is needed to remove a power steering pump pulley on a 1996 ford wind star?
You will need a pulley puller to remove a power steering pump on a 1996 Ford Windstar.
How to remove a power steering belt on a 1996 montero?
Use a knife and cut it
Where is the oil filter located on a 1996 Buick Century?
Right under the power steering pump.
Do you have to remove power steering pump on 1996 Pontiac Bonneville 3800 to replace water pump?
No, you don't have to remove the power steering pump to remove water pump. You do have to loosen the 2 screws that hold the power steering pump and then move power steering pump about an inch or so, so you can have access to some of the screws that hold the water pump on.
How do you remove the belt in order to remove the alternator in a 1996 Jeep Cherokee?
The ajustment bolt for the belt is under the power steering pump.
How do you remove a power steering pump on a 1996 dodge grand caravan with no reservoir on pump?
Got to drop the engine
How do you replace power steeringhigh psi line on 1996 thunderbird 4.6?
Remove the power steering pump bracket. It can be done without dropping the rack.
How do you replace the power steering belt on a 1996 Lexus ES 300?
How do you change the power steering belt on a 1996 lexus es300?
Do all 1996 Ford Fiesta 1.3 encore have power steering?
Yes, ..96 have power steerings No not all 1996 Ford Fiestas have power steering!
1996 dodge ram 5.9 power steering pully removal?
1996 dodge ram 5.9 power steering pully removal?
What kind of power steering fluid for 1996 Dodge Ram 2500?
A 1996 Ram uses regular power steering fluid of any brand.
How do you change powersteering pumpin a 1996chevy astro van?
To change the power steering pump on the 1996 Chevy Astro van, you will first need to gather the correct tools. This job requires a special tool to remove the power steering pulley. You will disconnect the negative battery cable, remove the power steering pump pulley, remove the old pump, and replace it with the new pump by bolting the pump into the system.
