The paper decoration will flutter because of the convection currents which makes the air in the room to circulate and move that decor piece.
Paper decorations can flutter when placed above a hot room heater due to the rising warm air currents generated by the heater. The heat causes the air to become less dense, leading to upward drafts that can cause lightweight items, like paper, to move or flutter. This effect is more pronounced if the decorations are not secured and are made of lightweight material. Adequate placement away from heat sources is advisable to avoid potential fire hazards.
what is a room heater
All you do is you get a sheet of white paper, soak it in water, then leave to dry. It is good to keep it near a heater or you could put it in a boiler room if you have one.
An electric room heater may be used to heat a room when it is cold, they are commonly used in the winter. An electric room heater may also be used to discharge the heat outside and keep the house cool.
you but a heater in side the room.
The mode of heat transfer from a room heater is convection. This process involves the transfer of heat through the movement of fluids or gases, such as air. The heater warms the air in the room, causing it to rise and circulate, thus heating the surrounding space.
The Amish portable room heater is space heater that saves energy and cuts down your bill during the winter. It is able to be moved from room to room. It also has a beautiful fireplace look and sound to it without the mess of a real fireplace.
Keep going up; eventually you will find it. (It should be in the middle of the room above Peach.)
The heater contains a resistor. When high voltage is passed it produce a large amount of heat the blower situated in the heater blows this heat which diffuses in the room to make the room hot.
About 100 square feet is the averge room size for a heater to be used.
The purpose of a heater is to heat up the room when it is cold; by using gas
The polished surface at the back of a heating rod in a room heater helps to reflect heat back into the room instead of allowing it to escape through the back of the heater. This increases the heating efficiency of the heater and helps to keep the room warm. This reflection of heat can also help to distribute the heat more evenly throughout the room.